Počet záznamov: 1  

Influence of the processed material on the sound pressure level generated by sliding table circular saw

  1. NázovInfluence of the processed material on the sound pressure level generated by sliding table circular saw
    Aut.údajePavlin Vitchev, Dimitar Angelski, Vladimir Mihailov
    Preklad názvupodnázvu : Vplyv spracovaného materiálu na hladinu akustického tlaku vytvoreného stolovou kotúčovou pílou
    Autor Vitchev Pavlin
    Spoluautori Angelski Dimitar
    Mihailov Vladimir
    Zdroj.dok. Acta Facultatis Xylologiae Zvolen : vedecký časopis Drevárskej fakulty. Vol. 61, no. 2 (2019), s. 73-80. - Zvolen : Technická univerzita vo Zvolene, 2019
    Jazyk dok.angličtina
    KrajinaSlovenská republika
    Systematika534.83
    630*822.33
    621.934
    630*862.2
    630*832.2
    Heslá hladina akustického tlaku - sound pressure level * hluk - noise * kotúčové píly - circular sawing machines * drevotrieskové dosky - particleboards * OSB dosky - oriented strand board * preglejované materiály - plywood materials
    AnotáciaThe aim of the current study isto investigate the changes in the sound pressure level generated at the operator’s position of sliding table circular saw depending on the type of the processed material, the cutting height (h) and the tool overhang effect (T) (T1= 7; T2= 14;T3= 21 mm). The experiments were performed with specimens from chipboard oriented strand board (OSB) and plywood with cutting height of 15, 30, 45 mm. The generated sound pressure level was measured using the method of “sound free field” taking into account the influence of the background noise and the characteristics of the sound field. The measurement of the A-weighted sound pressure level was performed using precise digital sound level meter CEL-620B1 (CASELLA, United Kingdom). The obtained results showed that the sound pressure level is influenced by the type of the processed material and it is changed at the cutting height of 15 mm as follows: plywood–89.5 dB(A); OSB –88 dB(A) and chipboard–86.5 dB(A). An increase in the tool overhang effect from 7 mm to14 mm resulted in an increase in the sound pressure level by 3÷4 dB(A) on average for all three types of processed material.
    URLhttps://df.tuzvo.sk/sites/default/files/07-02-19_0.pdf
    Kategória publikačnej činnosti ADN
    Báza dátxcla - ČLÁNKY
    Druh dok.RBX - rozpis článkov z periodík
    OdkazyPERIODIKÁ-Súborný záznam periodika
    Zväzky2019: 1-2
    článok

    článok

Počet záznamov: 1  

  Tieto stránky využívajú súbory cookies, ktoré uľahčujú ich prezeranie. Ďalšie informácie o tom ako používame cookies.