Počet záznamov: 1
Defects-tolerant Co-Cr-Mo dental alloys prepared by selective laser melting
Názov Defects-tolerant Co-Cr-Mo dental alloys prepared by selective laser melting Autor Qian B. Spoluautori Saeidi Kamran Kvetková Lenka 1982 SAVMATVY - Ústav materiálového výskumu SAV SCOPUS Lofaj František 1960 SCOPUS ORCID Xiao C. Shen Zhijian Zdroj.dok. Dental Materials. Vol. 31 (2015), p. 1435-1444 Jazyk dok. eng - angličtina Krajina NL - Holandsko Druh dok. rozpis článkov z periodík (rbx) Ohlasy YAN, Anru - WANG, Zhiyong - YANG, Tiantian - WANG, Yanling - MA, Zhihong. Microstructure, thermal physical property and surface morphology of W-Cu composite fabricated via selective laser melting. In MATERIALS & DESIGN. ISSN 0264-1275, 2016, vol. 109, no., pp. 79-87. BUCIUMEANU, M. - BAGHERI, A. - SOUZA, J. C. M. - SILVA, F. S. - HENRIQUES, B. Tribocorrosion behavior of hot pressed CoCrMo alloys in artificial saliva. In TRIBOLOGY INTERNATIONAL. ISSN 0301-679X, 2016, vol. 97, no., pp. 423-430. RIST, Kristijan - ČIMIĆ, Samir. Selective laser melting technique in fabrication of partial denture metal framework. In Research Journal of Pharmaceutical, Biological and Chemical Sciences, 2016-01-01, 7, 3, pp. 2039-2043. KIM, Dong-Yeon - KIM, Ji-Hwan - KIM, Hae-Young - KIM, Woong-Chul. Comparison and evaluation of marginal and internal gaps in cobalt-chromium alloy copings fabricated using subtractive and additive manufacturing. In JOURNAL OF PROSTHODONTIC RESEARCH. ISSN 1883-1958, 2018, vol. 62, no. 1, pp. 56-64. AHMADI, S. M. - HEDAYATI, R. - LI, Y. - LIETAERT, K. - TUMER, N. - FATEMI, A. - RANS, C. D. - POURAN, B. - WEINANS, H. - ZADPOOR, A. A. Fatigue performance of additively manufactured meta-biomaterials: The effects of topology and material type. In ACTA BIOMATERIALIA. ISSN 1742-7061, 2018, vol. 65, no., pp. 292-304. AHERWAR, Amit - SINGH, Amit - PATNAIK, Amar. A study on mechanical behavior and wear performance of a metal-metal Co-30Cr biomedical alloy with different molybdenum addition and optimized using Taguchi experimental design. In JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING. ISSN 1678-5878, 2018, vol. 40, no. 4, pp. POROJAN, Sorin - BIRDEANU, Mihaela - SAVENCU, Cristina - POROJAN, Liliana. Structural and morphological approach of Co-Cr dental alloys processed by alternative manufacturing technologies. In 6TH INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND PROCESS (ICMEP 2017). ISSN 1742-6588, 2017, vol. 885, no., pp. REVILLA-LEÓN, Marta - ÖZCAN, Mutlu. Additive Manufacturing Technologies Used for 3D Metal Printing in Dentistry. In Current Oral Health Reports, 2017-09-01, 4, 3, pp. 201-208. Dostupné na: https://doi.org/10.1007/s40496-017-0152-0. LU, Yanjin - REN, Ling - WU, Songquan - YANG, Chunguang - LIN, Wenlie - XIAO, Suli - YANG, Yang - YANG, Ke - LIN, Jinxin. CoCrWCu alloy with antibacterial activity fabricated by selective laser melting: Densification, mechanical properties and microstructural analysis. In POWDER TECHNOLOGY. ISSN 0032-5910, 2018, vol. 325, no., pp. 289-300. YAMANAKA, Kenta - MORI, Manami - TORITA, Yasuhiro - CHIBA, Akihiko. Effect of nitrogen on the microstructure and mechanical properties of Co-33Cr-9W alloys prepared by dental casting. In JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS. ISSN 1751-6161, 2018, vol. 77, no., pp. 693-700. PRASHANTH, K. G. - ECKERT, J. Formation of metastable cellular microstructures in selective laser melted alloys. In JOURNAL OF ALLOYS AND COMPOUNDS. ISSN 0925-8388, 2017, vol. 707, no., pp. 27-34. TOH, Wei Quan - TAN, Xipeng - BHOWMIK, Ayan - LIU, Erjia - TOR, Shu Beng. Tribochemical Characterization and Tribocorrosive Behavior of CoCrMo Alloys: A Review. In MATERIALS. ISSN 1996-1944, 2018, vol. 11, no. 1, pp. KRELL, Julian - ROETTGER, Arne - GEENEN, Karina - THEISEN, Werner. General investigations on processing tool steel X40CrMoV5-1 with selective laser melting. In JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. ISSN 0924-0136, 2018, vol. 255, no., pp. 679-688. YAKOUT, Mostafa - ELBESTAWI, M. A. - VELDHUIS, Stephen C. On the characterization of stainless steel 316L parts produced by selective laser melting. In INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. ISSN 0268-3768, 2018, vol. 95, no. 5-8, pp. 1953-1974. ANTANASOVA, Maja - KOCJAN, Andraz - KOVAC, Janez - ZUZEK, Borut - JEVNIKAR, Peter. Influence of thermo-mechanical cycling on porcelain bonding to cobalt-chromium and titanium dental alloys fabricated by casting, milling, and selective laser melting. In JOURNAL OF PROSTHODONTIC RESEARCH. ISSN 1883-1958, 2018, vol. 62, no. 2, pp. 184-194. CHEN, Z. W. - PHAN, M. A. L. - DARVISH, K. Grain growth during selective laser melting of a Co-Cr-Mo alloy. In JOURNAL OF MATERIALS SCIENCE. ISSN 0022-2461, 2017, vol. 52, no. 12, pp. 7415-7427. SAVENCU, Cristina Elena - POROJAN, Liliana - BÎRDEANU, Mihaela - BOLOŞ, Adrian - POROJAN, Sorin - ANTONIAC, Aurora - GRADINARU, Sebastian. Surface characteristics of base metal dental alloys processed by alternative procedures. In Defect and Diffusion Forum. ISSN 10120386, 2017-01-01, 376, pp. 1-11. REN, Bo - CHEN, Changjun - ZHANG, Min. Effect of heat treatment on the microstructure of Co-Cr-W alloy fabricated by laser additive manufacturing. In Optical Engineering. ISSN 00913286, 2018-04-01, 57, 4, pp. SING, Swee Leong - YEONG, Wai Yee. EFFECT OF HEAT TREATMENT ON COBALT-CHROMIUM-MOLYBDENUM ALLOY FABRICATED BY SELECTIVE LASER MELTING. In PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING. ISSN 2424-8967, 2018, vol., no., pp. 458-463. WEI, Wei - ZHOU, Yanan - LIU, Wenbo - LI, Ning - YAN, Jiazhen - LI, Haopeng. Microstructural Characterization, Mechanical Properties, and Corrosion Resistance of Dental Co-Cr-Mo-W Alloys Manufactured by Selective Laser Melting. In JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. ISSN 1059-9495, 2018, vol. 27, no. 10, pp. 5312-5320. ZHANG, Mingkang - YANG, Yongqiang - SONG, Changhui - BAI, Yuchao - XIAO, Zefeng. Effect of the heat treatment on corrosion and mechanical properties of CoCrMo alloys manufactured by selective laser melting. In RAPID PROTOTYPING JOURNAL. ISSN 1355-2546, 2018, vol. 24, no. 7, pp. 1235-1244. CUTOLO, Antonio - NEIRINCK, Bram - LIETAERT, Karel - DE FORMANOIR, Charlotte - VAN HOOREWEDER, Brecht. Influence of layer thickness and post-process treatments on the fatigue properties of CoCr scaffolds produced by laser powder bed fusion. In ADDITIVE MANUFACTURING. ISSN 2214-8604, 2018, vol. 23, no., pp. 498-504. BAWANE, Kaustubh Krishna - SRINIVASAN, Dheepa - BANERJEE, Dipankar. Microstructural Evolution and Mechanical Properties of Direct Metal Laser-Sintered (DMLS) CoCrMo After Heat Treatment. In METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE. ISSN 1073-5623, 2018, vol. 49A, no. 9, pp. 3793-3811. REVILLA-LEON, Marta - CEBALLOS, Laura - MARTINEZ-KLEMM, Inaki - OZCAN, Mutlu. Discrepancy of complete-arch titanium frameworks manufactured using selective laser melting and electron beam melting additive manufacturing technologies. In JOURNAL OF PROSTHETIC DENTISTRY. ISSN 0022-3913, 2018, vol. 120, no. 6, pp. 942-947. UCAR, Yurdanur - EKREN, Orhun. Effect of layered manufacturing techniques, alloy powders, and layer thickness on mechanical properties of Co-Cr dental alloys. In JOURNAL OF PROSTHETIC DENTISTRY. ISSN 0022-3913, 2018, vol. 120, no. 5, pp. 762-770. ZHOU, Yanan - LI, Ning - YAN, Jiazhen - ZENG, Qiang. Comparative analysis of the microstructures and mechanical properties of Co-Cr dental alloys fabricated by different methods. In JOURNAL OF PROSTHETIC DENTISTRY. ISSN 0022-3913, 2018, vol. 120, no. 4, pp. 617-623. KASERER, L. - BRAUN, J. - STAJKOVIC, J. - LEITZ, K-H - TABERNIG, B. - SINGER, P. - LETOFSKY-PAPST, I - KESTLER, H. - LEICHTFRIED, G. Fully dense and crack free molybdenum manufactured by Selective Laser Melting through alloying with carbon. In INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS. ISSN 0263-4368, 2019, vol. 84, no., pp. ZHOU, Yanan - WEI, Wei - YAN, Jiazhen - LIU, Wenbo - LI, Ning - LI, Haopeng - XU, Sheng. Microstructures and metal-ceramic bond properties of Co-Cr biomedical alloys fabricated by selective laser melting and casting. In MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. ISSN 0921-5093, 2019, vol. 759, no., pp. 594-602. HUYNH, Vivian - NGO, Ngan K. - GOLDEN, Teresa D. Surface Activation and Pretreatments for Biocompatible Metals and Alloys Used in Biomedical Applications. In INTERNATIONAL JOURNAL OF BIOMATERIALS. ISSN 1687-8787, 2019, vol., no., pp. REVILLA-LEON, Marta - CEBALLOS, Laura - OZCAN, Mutlu. Implant-Prosthodontic Discrepancy of Complete-Arch Cobalt-Chromium Implant Frameworks Manufactured Through Selective Laser Melting Additive Manufacturing Technology Using a Coordinate Measuring Machine. In INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS. ISSN 0882-2786, 2019, vol. 34, no. 3, pp. 698-707. WANG, Bo - AN, Xinglong - HUANG, Zonglian - SONG, Min - NI, Song - LIU, Shaojun. Nitrogen doped Co-Cr-Mo-W based alloys fabricated by selective laser melting with enhanced strength and good ductility. In JOURNAL OF ALLOYS AND COMPOUNDS. ISSN 0925-8388, 2019, vol. 785, no., pp. 305-311. REVILLA-LEON, M. - MEYER, M. J. - OZCAN, M. Metal additive manufacturing technologies: literature review of current status and prosthodontic applications. In INTERNATIONAL JOURNAL OF COMPUTERIZED DENTISTRY. ISSN 1463-4201, 2019, vol. 22, no. 1, pp. 55-67. TAN, Fa-Bing - SONG, Jin-Lin - WANG, Chao - FAN, Yu-Bo - DAI, Hong-Wei. Titanium clasp fabricated by selective laser melting, CNC milling, and conventional casting: a comparative in vitro study. In JOURNAL OF PROSTHODONTIC RESEARCH. ISSN 1883-1958, 2019, vol. 63, no. 1, pp. 58-65. ZHOU, Yanan - WEI, Wei - YAN, Jiazhen - LI, Ning - XU, Sheng - ZHANG, Biao. Evaluation of Metal-ceramic Bond Characteristics of Co-Cr-Mo Alloys Fabricated by Selective Laser Melting. In Gongcheng Kexue Yu Jishu/Advanced Engineering Science. ISSN 20963246, 2018-03-20, 50, 2, pp. 220-225. BAJUNAID, Salwa O. - ALTWAIM, Bashaer - ALHASSAN, Muneera - ALAMMARI, Rawan. The fit accuracy of removable partial denture metal frameworks using conventional and 3D printed techniques: An in vitro study. In Journal of Contemporary Dental Practice, 2019-01-01, 20, 4, pp. 476-481. SING, Swee Leong - HUANG, Sheng - YEONG, Wai Yee. Effect of solution heat treatment on microstructure and mechanical properties of laser powder bed fusion produced cobalt-28chromium-6molybdenum. In MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. ISSN 0921-5093, 2020, vol. 769, no., pp. HUANG, Zonglian - WANG, Bo - LIU, Fei - MA, Qing - LIU, Shaojun. Effects of processing parameters on microstructure and mechanical properties of Co-25Cr-5Mo-5W alloys by selective laser melting. In Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of Powder Metallurgy. ISSN 16730224, 2018-12-01, 23, 6, pp. 582-590. HARUN, Wan Sharuzi Wan - KADIRGAMA, Kumaran - SAMYKANO, Mahendran - RAMASAMY, Devarajan - AHMAD, Iswadi - MORADI, Mahmoud. Mechanical behavior of selective laser melting-produced metallic biomaterials. In MECHANICAL BEHAVIOR OF BIOMATERIALS. ISSN 2049-9485, 2019, vol., no., pp. 101-116. NI, J. - LING, H. - ZHANG, S. - WANG, Z. - PENG, Z. - BENYSHEK, C. - ZAN, R. - MIRI, A. K. - LI, Z. - ZHANG, X. - LEE, J. - LEE, K.J. - KIM, H.J. - TEBON, P. - HOFFMAN, T. - DOKMECI, M. R. - ASHAMMAKHI, N. - LI, X. - KHADEMHOSSEINI, A. Three-dimensional printing of metals for biomedical applications. In MATERIALS TODAY BIO. ISSN 2590-0064, 2019, vol. 3, no., pp. ANTANASOVA, Maja - KOCJAN, Andraz - ZUZEK, Borut - JOVANOVSKI, Saso - JEVNIKAR, Peter. THE BOND STRENGTH OF DENTAL PORCELAIN TO COBALT-CHROMIUM ALLOYS FABRICATED BY CASTING, MILLING AND BY SELECTIVE LASER MELTING: A COMPARATIVE ANALYSIS. In MATERIALI IN TEHNOLOGIJE. ISSN 1580-2949, 2019, vol. 53, no. 6, pp. 845-852. MOHAMMED, Mohsin Talib - SEMELOV, V. G. - SOTOV, A. SLM-built titanium materials: great potential of developing microstructure and properties for biomedical applications: a review. In MATERIALS RESEARCH EXPRESS. ISSN 2053-1591, 2019, vol. 6, no. 12, pp. TONELLI, L. - BOROMEI, I - FORTUNATO, A. - CESCHINI, L. Selective Laser Melting of a CoCrMo alloy for biomedical applications: correlations between microstructure and process parameters. In METALLURGIA ITALIANA. ISSN 0026-0843, 2019, vol., no. 6, pp. 41-47. LU, Yanjin - YANG, Chunguang - LIU, Yujing - YANG, Ke - LIN, Jinxin. Characterization of lattice defects and tensile deformation of biomedical Co29Cr9W3Cu alloy produced by selective laser melting. In ADDITIVE MANUFACTURING. ISSN 2214-8604, 2019, vol. 30, no., pp. HONG, Qin - BAI, Peikang - WANG, Jianhong. Effects of Al2O3 Addition on the Microstructure and Properties of CoCr Alloys. In METALS, 2019, vol. 9, no. 10, pp. GANBOLD, Boldbayar - HEO, Seong-Joo - KOAK, Jai-Young - KIM, Seong-Kyun - CHO, Jaejin. Human Stem Cell Responses and Surface Characteristics of 3D Printing Co-Cr Dental Material. In MATERIALS, 2019, vol. 12, no. 20, pp. LI, Bo - QIAN, Bo - XU, Yi - LIU, Zhiyuan - ZHANG, Jianrui - XUAN, Fuzhen. Additive manufacturing of ultrafine-grained austenitic stainless steel matrix composite via vanadium carbide reinforcement addition and selective laser melting: Formation mechanism and strengthening effect. In Materials Science and Engineering A, 2019-02-04, 745, pp. 495-508. ISSN 09215093. Dostupné na: https://doi.org/10.1016/j.msea.2019.01.008. ANTANASOVA, Maja - KOCJAN, Andraz - HOCEVAR, Matej - JEVNIKAR, Peter. Influence of surface airborne-particle abrasion and bonding agent application on porcelain bonding to titanium dental alloys fabricated by milling and by selective laser melting. In JOURNAL OF PROSTHETIC DENTISTRY. ISSN 0022-3913, 2020, vol. 123, no. 3, pp. 491-499. HONG, Jia Herh - YEOH, Fei Yee. Mechanical properties and corrosion resistance of cobalt-chrome alloy fabricated using additive manufacturing. In MATERIALS TODAY-PROCEEDINGS. ISSN 2214-7853, 2020, vol. 29, no., pp. 196-201. TUNA, Suleyman Hakan - KARACA, Erhan - ASLAN, Ismail - PEKKAN, Gurel - PEKMEZ, Nuran Ozcicek. Evaluation of corrosion resistance of Co-Cr alloys fabricated with different metal laser sintering systems. In JOURNAL OF ADVANCED PROSTHODONTICS. ISSN 2005-7806, 2020, vol. 12, no. 3, pp. 114-123. BUJ-CORRAL, Irene - TEJO-OTERO, Aitor - FENOLLOSA-ARTES, Felip. Development of AM Technologies for Metals in the Sector of Medical Implants. In METALS, 2020, vol. 10, no. 5, pp. DOS SANTOS, Claudinei - HABIBE, Alexandre Fernandes - SIMBA, Bruno Galvao - CARDOSO LINS, Jefferson Fabricio - DE FREITAS, Bruno Xavier - NUNES, Carlos Angelo. CoCrMo-base Alloys for Dental Applications Obtained by Selective laser melting (SLM) and CAD/CAM Milling. In MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS. ISSN 1516-1439, 2020, vol. 23, no. 2, pp. REVILLA-LEON, Marta - SADEGHPOUR, Mehrad - OZCAN, Mutlu. A Review of the Applications of Additive Manufacturing Technologies Used to Fabricate Metals in Implant Dentistry. In JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY. ISSN 1059-941X, 2020, vol. 29, no. 7, pp. 579-593. KIM, Kyu-Sik - HWANG, Jae-Won - LEE, Kee-Ahn. Effect of building direction on the mechanical anisotropy of biocompatible Co-Cr-Mo alloy manufactured by selective laser melting process. In JOURNAL OF ALLOYS AND COMPOUNDS. ISSN 0925-8388, 2020, vol. 834, no., pp. WEI, Wei - ZHOU, Yanan - SUN, Qi - LI, Ning - YAN, Jiazhen - LI, Haopeng - LIU, Wenbo - HUANG, Chongxiang. Microstructures and Mechanical Properties of Dental Co-Cr-Mo-W Alloys Fabricated by Selective Laser Melting at Different Subsequent Heat Treatment Temperatures. In METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE. ISSN 1073-5623, 2020, vol. 51, no. 6, pp. 3205-3214. TONELLI, Lavinia - FORTUNATO, Alessandro - CESCHINI, Lorella. CoCr alloy processed by Selective Laser Melting (SLM): effect of Laser Energy Density on microstructure, surface morphology, and hardness. In JOURNAL OF MANUFACTURING PROCESSES. ISSN 1526-6125, 2020, vol. 52, no., pp. 106-119. LI, Kefeng - MAO, Xinhua - KHANLARI, Khashayar - SONG, Kaikai - SHI, Qi - LIU, Xin. Effects of powder size distribution on the microstructural and mechanical properties of a Co-Cr-W-Si alloy fabricated by selective laser melting. In JOURNAL OF ALLOYS AND COMPOUNDS. ISSN 0925-8388, 2020, vol. 825, no., pp. DOWLING, L. - KENNEDY, J. - O'SHAUGHNESSY, S. - TRIMBLE, D. A review of critical repeatability and reproducibility issues in powder bed fusion. In MATERIALS & DESIGN. ISSN 0264-1275, 2020, vol. 186, no., pp. BARRO, Oscar - ARIAS-GONZALEZ, Felipe - LUSQUINOS, Fernando - COMESANA, Rafael - DEL VAL, Jesus - RIVEIRO, Antonio - BADAOUI, Aida - GOMEZ-BANO, Felix - POU, Juan. Effect of Four Manufacturing Techniques (Casting, Laser Directed Energy Deposition, Milling and Selective Laser Melting) on Microstructural, Mechanical and Electrochemical Properties of Co-Cr Dental Alloys, Before and After PFM Firing Process. In METALS, 2020, vol. 10, no. 10, pp. MUNIR, Khurram - BIESIEKIERSKI, Arne - WEN, Cuie - LI, Yuncang. Selective laser melting in biomedical manufacturing. In Metallic Biomaterials Processing and Medical Device Manufacturing, 2020-01-01, pp. 235-269. Dostupné na: https://doi.org/10.1016/B978-0-08-102965-7.00007-2. YAN ANRU - LIU XUESHENG - WANG ZHIYONG - HE DINGYONG. Effect of W Content on Microstructure and Thermophysical Properties of W-Cu Composites Fabricated via Selective Laser Melting. In CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG. ISSN 0258-7025, 2019, vol. 46, no. 7, pp. KARIMI, J. - MA, P. - JIA, Y. D. - PRASHANTH, K. G. Linear patterning of high entropy alloy by additive manufacturing. In MANUFACTURING LETTERS. ISSN 2213-8463, 2020, vol. 24, no., pp. 9-13. REVILLA-LEON, Marta - HUSAIN, Nadin Al-Haj - METHANI, Mohammed Mujtaba - OZCAN, Mutlu. Chemical composition, surface roughness, and ceramic bond strength of additively manufactured cobalt-chromium dental alloys. In JOURNAL OF PROSTHETIC DENTISTRY. ISSN 0022-3913, 2021, vol. 125, no. 5, pp. 825-831. REVILLA-LEON, Marta - SANCHEZ-RUBIO, Jose Luis - PEREZ-LOPEZ, Javier - RUBENSTEIN, Jeffrey - OZCAN, Mutlu. Discrepancy at the implant abutment-prosthesis interface of complete-arch cobalt-chromium implant frameworks fabricated by additive and subtractive technologies before and after ceramic veneering. In JOURNAL OF PROSTHETIC DENTISTRY. ISSN 0022-3913, 2021, vol. 125, no. 5, pp. 795-803. ROUDNICKA, Michaela - MOLNAROVA, Orsolya - DRAHOKOUPIL, Jan - KUBASEK, Jiri - BIGAS, Jiri - SREIBR, Vit - PALOUSEK, David - VOJTECH, Dalibor. Microstructural instability of L-PBF Co-28Cr-6Mo alloy at elevated temperatures. In ADDITIVE MANUFACTURING. ISSN 2214-8604, 2021, vol. 44, no., pp. ROUDNICKA, Michaela - BIGAS, Jiri - MOLNAROVA, Orsolya - PALOUSEK, David - VOJTECH, Dalibor. Different Response of Cast and 3D-Printed Co-Cr-Mo Alloy to Heat Treatment: A Thorough Microstructure Characterization. In METALS, 2021, vol. 11, no. 5, pp. KIM, Hyung Giun - KIM, Won Rae - PARK, Hyun Woong - BANG, Gyung Bae - JUNG, Kyung-Hwan - SON, Yong - LIM, Sung Hwan. Microstructural study of the nano-scale martensitic lamellar alpha-Co and epsilon-Co phases of a Co-Cr alloy fabricated by selective laser melting. In JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T. ISSN 2238-7854, 2021, vol. 12, no., pp. 437-443. LIVERANI, Erica - ROGATI, Giulia - PAGANI, Stefania - BROGINI, Silvia - FORTUNATO, Alessandro - CARAVAGGI, Paolo. Mechanical interaction between additive-manufactured metal lattice structures and bone in compression: implications for stress shielding of orthopaedic implants. In JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS. ISSN 1751-6161, 2021, vol. 121, no., pp. DOVGYY, Bogdan - SIMONELLI, Marco - PHAM, Minh-Son. Alloy design against the solidification cracking in fusion additive manufacturing: an application to a FeCrAl alloy. In MATERIALS RESEARCH LETTERS. ISSN 2166-3831, 2021, vol. 9, no. 8, pp. 350-357. CARASI, Gregorio - YU, Bosco - HUTTEN, Esther - ZUROB, Hatem - CASATI, Riccardo - VEDANI, Maurizio. Effect of Heat Treatment on Microstructure Evolution of X38CrMoV5-1 Hot-Work Tool Steel Produced by L-PBF. In METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE. ISSN 1073-5623, 2021, vol. 52, no. 6, pp. 2564-2575. TONELLI, L. - BOROMEI, I - LIVERANI, E. - CESCHINI, L. Microstructural evolution induced by heat treatment in the Co28Cr6Mo alloy produced by Selective Laser Melting. In METALLURGIA ITALIANA. ISSN 0026-0843, 2021, vol., no. 2, pp. 22-30. TONELLI, Lavinia. Revealing the Hierarchical Microstructure of Innovative Additively Manufactured Metal Parts with Conventional Light Microscopy. In METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS. ISSN 2192-9262, 2021, vol. 10, no. 2, pp. 278-282. CAMACHO PRESOTTO, Anna Gabriella - CORDEIRO, Jairo Matozinho - CAMACHO PRESOTTO, Joao Gabriel - RANGEL, Elidiane Cipriano - DA CRUZ, Nilson Cristino - LANDERS, Richard - BARAO, Valentim Adelino R. - MESQUITA, Marcelo Ferraz. Feasibility of 3D printed Co-Cr alloy for dental prostheses applications. In JOURNAL OF ALLOYS AND COMPOUNDS. ISSN 0925-8388, 2021, vol. 862, no., pp. KARIMI, J. - SURYANARAYANA, C. - OKULOV, I - PRASHANTH, K. G. Selective laser melting of Ti6Al4V: Effect of laser re-melting. In MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. ISSN 0921-5093, 2021, vol. 805, no., pp. KONG, Decheng - DONG, Chaofang - WEI, Shaolou - NI, Xiaoqing - ZHANG, Liang - LI, Ruixue - WANG, Li - MAN, Cheng - LI, Xiaogang. About metastable cellular structure in additively manufactured austenitic stainless steels. In ADDITIVE MANUFACTURING. ISSN 2214-8604, 2021, vol. 38, no., pp. KHORSANDI, Danial - FAHIMIPOUR, Amir - ABASIAN, Payam - SABER, Sepehr Sadeghpour - SEYEDI, Mahla - GHANAVATI, Sonya - AHMAD, Amir - DE STEPHANIS, Andrea Amoretti - TAGHAVINEZHADDILAMI, Fatemeh - LEONOVA, Anna - MOHAMMADINEJAD, Reza - SHABANI, Majid - MAZZOLAI, Barbara - MATTOLI, Virgilio - TAY, Franklin R. - MAKVANDI, Pooyan. 3D and 4D printing in dentistry and maxillofacial surgery: Printing techniques, materials, and applications. In ACTA BIOMATERIALIA. ISSN 1742-7061, 2021, vol. 122, no., pp. 26-49. HU, Yabo - DONG, Chaofang - KONG, Decheng - DING, Jungang - HE, Xing - NI, Xiaoqing - ZHANG, Liang - LI, Xiaogang. Effects of post-production heat treatment on the mechanical and corrosion behaviour of CoCrMoW alloy manufactured through selective laser melting. In MATERIALS TODAY COMMUNICATIONS, 2021, vol. 29, no., pp. Dostupné na: https://doi.org/10.1016/j.mtcomm.2021.102994. FANG, Ruirui - DENG, Nana - ZHANG, Hongbin - WANG, Gang - SU, Yukuo - ZHOU, Haiping - GAO, Kuidong - GU, Lianwang. Effect of selective laser melting process parameters on the microstructure and properties of a precipitation hardening stainless steel. In MATERIALS & DESIGN, 2021, vol. 212, no., pp. ISSN 0264-1275. Dostupné na: https://doi.org/10.1016/j.matdes.2021.110265. XIA YELIN - HUANG ZHAOZHEN - CHEN HENNING - LIANG XIAODAN - SHI CHUAN. In-situ Spectral Monitoring of Microstructure During Laser Melting Deposition: A Case Study of CoCrMoW Alloy. In RARE METAL MATERIALS AND ENGINEERING, 2021, vol. 50, no. 11, pp. 3901-3909. ISSN 1002-185X. YANG, Jingfan - SONG, Miao - HAWKINS, Laura R. - LIU, Xiang - HE, Lingfeng - LOU, Xiaoyuan. Effects of heat treatment on corrosion fatigue and stress corrosion crack growth of additive-manufactured Alloy 800H in high-temperature water. In CORROSION SCIENCE, 2021, vol. 191, no., pp. ISSN 0010-938X. Dostupné na: https://doi.org/10.1016/j.corsci.2021.109739. SAINI, J. S. - DOWLING, Luke - TRIMBLE, Daniel - SINGH, Daljeet. Mechanical Properties of Selective Laser Melted CoCr Alloys: A Review. In JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, vol. 30, no. 12, pp. 8700-8714. ISSN 1059-9495. Dostupné na: https://doi.org/10.1007/s11665-021-06283-1. DAOU, Elie E. Comparison of Accuracy of Fit of Three-Unit Fixed Ceramic Cobalt-Chromium Dental Prostheses Fabricated by Three Different Techniques. In INTERNATIONAL JOURNAL OF PROSTHODONTICS, 2021, vol. 34, no. 5, pp. 642-649. ISSN 0893-2174. Dostupné na: https://doi.org/10.11607/ijp.6873. WANG, Jiale - CHEN, Changjun - ZHANG, Min. Effect of Mo and Tempering Treatment on the Microstructural Evolution and Mechanical Properties of M2 High-Speed Steel Prepared by Laser-Directed Energy Deposition. In STEEL RESEARCH INTERNATIONAL, 2021, vol. 92, no. 11, pp. ISSN 1611-3683. Dostupné na: https://doi.org/10.1002/srin.202100225. DA SILVA COSTA, Alex Matos - OLIVEIRA, Joao Pedro - JARDINI MUNHOZ, Andre Luiz - BARBOSA LEITE, Eduardo Guimaraes - DE FREITAS, Denise Souza - MONTEIRO, Mauricio de Jesus - RODRIGUEZ, Johnnatan. Co-Cr-Mo alloy fabricated by laser powder bed fusion process: grain structure, defect formation, and mechanical properties. In INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, vol. 116, no. 7-8, pp. 2387-2399. ISSN 0268-3768. Dostupné na: https://doi.org/10.1007/s00170-021-07570-w. TATAR, Numan - TUZLAH, Mesut - BAHCE, Erkan. Investigation of the Lattice Production of Removable Dental Prostheses with CoCr Alloy Using Additive Manufacturing. In JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, vol. 30, no. 9, pp. 6722-6731. ISSN 1059-9495. Dostupné na: https://doi.org/10.1007/s11665-021-05972-1. ACHARYA, Srijan - SONI, Rishabh - SUWAS, Satyam - CHATTERJEE, Kaushik. Additive manufacturing of Co-Cr alloys for biomedical applications: A concise review. In JOURNAL OF MATERIALS RESEARCH, 2021, vol. 36, no. 19, pp. 3746-3760. ISSN 0884-2914. Dostupné na: https://doi.org/10.1557/s43578-021-00244-z. ANTANASOVA, Maja - KOCJAN, Andraz - ABRAM, Anze - KOVAC, Janez - JEVNIKAR, Peter. Pre-oxidation of selective-laser-melted titanium dental alloy: effects on surface characteristics and porcelain bonding. In JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2021, vol. 35, no. 19, pp. 2094-2109. ISSN 0169-4243. Dostupné na: https://doi.org/10.1080/01694243.2021.1877003. NIINOMI, Mitsuo. Co-Cr-based alloys. In Structural Biomaterials: Properties, Characteristics, and Selection, 2021-01-01, pp. 103-126. Dostupné na: https://doi.org/10.1016/B978-0-12-818831-6.00006-9. FINDRIK BALOGOVÁ, Alena - RAJŤÚKOVÁ, Viktória - CHROMÝ, Ľuboš - SOMOŠ, Andrej - IŽARÍKOVÁ, Gabriela - HUDÁK, Radovan. Biomechanical Testing of Two-Unit Bridges and a Comparison of Replacement Retention Depending on a Cementation Medium, Replacement Position, and Gap Size. In Journal of Functional Biomaterials, 2022-12-01, 13, 4, pp. Dostupné na: https://doi.org/10.3390/jfb13040286. DAOU, Elie E. - ÖZCAN, Mutlu. Evaluation of ceramic adherence to cobalt-chromium alloys fabricated by different manufacturing techniques. In Journal of Prosthetic Dentistry, 2022-12-01, 128, 6, pp. 1364.e1-1364.e8. ISSN 00223913. Dostupné na: https://doi.org/10.1016/j.prosdent.2022.10.007. LENG, Xiaoyan - XIA, Yelin - XU, Sichen - WANG, Chao - JIANG, Zhenhai. Study on the Microstructure and Mechanical Properties of CoCr Alloy Using Laser Melting Deposition. In Laser and Optoelectronics Progress, 2022-12-01, 59, 23, pp. ISSN 10064125. Dostupné na: https://doi.org/10.3788/LOP202259.2316001. XIAO, Jichang - ZHU, Jinxuan - WANG, Jiaxu - HE, Xiaofei - WEI, Wei. Effect of Subsequent Heat Treatment on Nano-Tribological Behavior of the Co-Cr Medical Alloy Fabricated by Selective Laser Melting. In Journal of Materials Engineering and Performance, 2022-12-01, 31, 12, pp. 9864-9877. ISSN 10599495. Dostupné na: https://doi.org/10.1007/s11665-022-07011-z. ZHANG, Jizhe - YAN, Pengfei - YAN, Biao. Effect of Different Heat Treatments on the Evolution of Novel Al-Si-Cu-Ni-Fe-Re Alloy Fabricated by Selective Laser Melting. In Metals, 2022-11-01, 12, 11, pp. Dostupné na: https://doi.org/10.3390/met12111827. AOTA, Shoya - YAMANAKA, Kenta - MORI, Manami - SASAKI, Nobuyuki - ADRIEN, Jérôme - MAIRE, Eric - FABRÈGUE, Damien - CHIBA, Akihiko. Solidification behavior and porosity in electron-beam powder bed fusion of Co–Cr–Mo alloys: Effect of carbon concentrations. In Additive Manufacturing, 2022-11-01, 59, pp. Dostupné na: https://doi.org/10.1016/j.addma.2022.103134. NARAYANAN, Deeparekha - LIU, Michael - KUTTOLAMADOM, Mathew - CASTANEDA, Homero. Identification and development of a new local corrosion mechanism in a Laser Engineered Net Shaped (LENS) biomedical Co-Cr-Mo alloy in Hank's solution. In Corrosion Science, 2022-10-01, 207, pp. ISSN 0010938X. Dostupné na: https://doi.org/10.1016/j.corsci.2022.110599. LIU, Yangping - MACE, Annsley - LEE, Hwaran - CAMARGO, Maria - GILBERT, Jeremy L. Single asperity sub-nano to nanoscale wear and tribocorrosion of wrought CoCrMo and additively manufactured CoCrMoW alloys. In Tribology International, 2022-10-01, 174, pp. ISSN 0301679X. Dostupné na: https://doi.org/10.1016/j.triboint.2022.107770. YAN, Anru - ATIF, Abbas Mirza - WANG, Xiaobo - LAN, Tian - WANG, Zhiyong. The Microstructure and Cracking Behaviors of Pure Molybdenum Fabricated by Selective Laser Melting. In Materials, 2022-09-01, 15, 18, pp. Dostupné na: https://doi.org/10.3390/ma15186230. MORI, Manami - GUO, Ting - YAMANAKA, Kenta - WANG, Zuyong - YOSHIDA, Kazuo - ONUKI, Yusuke - SATO, Shigeo - CHIBA, Akihiko - MISRA, R. D.K. The significance of thermomechanical processing on the cellular response of biomedical Co–Cr–Mo alloys. In Journal of the Mechanical Behavior of Biomedical Materials, 2022-09-01, 133, pp. ISSN 17516161. Dostupné na: https://doi.org/10.1016/j.jmbbm.2022.105360. WU, Miaomiao - DONG, Xin - QU, Yuntao - YAN, Jiazhen - LI, Ning. Analysis of microstructure and fatigue of cast versus selective laser-melted dental Co-Cr alloy. In Journal of Prosthetic Dentistry, 2022-08-01, 128, 2, pp. 218.e1-218.e7. ISSN 00223913. Dostupné na: https://doi.org/10.1016/j.prosdent.2022.05.011. YOUNSI, Tarek - BOHER, Christine - SOVEJA, Adriana. Influence of interlayer time on the microstructural state of CoCrMo coatings applied by selective laser melting on an iron-based substrate for different numbers of layers. In Materials Today Communications, 2022-08-01, 32, pp. Dostupné na: https://doi.org/10.1016/j.mtcomm.2022.103776. WANG, Yu - GUO, Yanyang - JIN, Yabing - WANG, Yijin - WANG, Chen. Mechanical properties, corrosion resistance, and anti-adherence characterization of pure titanium fabricated by casting, milling, and selective laser melting. In Journal of Biomedical Materials Research Part B Applied Biomaterials, 2022-07-01, 110, 7, pp. 1523-1534. ISSN 15524973. Dostupné na: https://doi.org/10.1002/jbm.b.35014. LIU, L. H. - MA, H. W. - YANG, S. J. - ZHAO, Y. J. - CAI, W. S. - CHEN, T. - ZHANG, W. W. - YANG, C. Decomposition of cellular structure in selective laser melted Cu–Zn–Si silicon brass and its influence on microstructure, mechanical and corrosion properties. In Materials Science and Engineering: A, 2022-04-28, 841, pp. ISSN 09215093. Dostupné na: https://doi.org/10.1016/j.msea.2022.143055. IM, Hyeon Tae - KIM, Dae Ha - KIM, Young Do - FADONOUGBO, Julien O. - MO, Chan Bin - PARK, Jae Young - PARK, Ki Beom - KANG, Jang Won - KANG, Hyun Su - PARK, Hyung Ki. Effect of phase transformation on the mechanical properties of the Co-Cr-Mo alloy fabricated by selective laser melting. In Materials Characterization, 2022-04-01, 186, pp. ISSN 10445803. Dostupné na: https://doi.org/10.1016/j.matchar.2022.111767. YE, Zhiyun - LI, Cuiqin - HUANG, Zhenghua - LUO, Hao - CHEN, Feng - YAN, Zhiqiao - LI, Jianing - XU, Chunjie - ZHANG, Zhongming. The effect of solution and aging treatments on the microstructure and mechanical properties of a selective laser melted CoCrMo alloy. In Journal of Materials Science, 2022-03-01, 57, 11, pp. 6445-6459. ISSN 00222461. Dostupné na: https://doi.org/10.1007/s10853-022-07047-5. DUAN, Heng - LIU, Bin - FU, Ao - HE, Junyang - YANG, Tao - LIU, C. T. - LIU, Yong. Segregation enabled outstanding combination of mechanical and corrosion properties in a FeCrNi medium entropy alloy manufactured by selective laser melting. In Journal of Materials Science and Technology, 2022-02-10, 99, pp. 207-214. ISSN 10050302. Dostupné na: https://doi.org/10.1016/j.jmst.2021.05.018. YANG, Jingfan - LIU, Xiang - SONG, Miao - HE, Lingfeng - BANKSON, Stephen - HAMILTON, Michael - PROROK, Bart - LOU, Xiaoyuan. Sensitization, desensitization, and carbide evolution of Alloy 800H made by laser powder bed fusion. In Additive Manufacturing, 2022-02-01, 50, pp. Dostupné na: https://doi.org/10.1016/j.addma.2021.102547. KE, Changkai - CHEN, Changjun - ZHANG, Min. Effect of Vanadium on Microstructure and Mechanical Properties of M2 High-Speed Steel Prepared by Laser Metal Direct Deposition Forming. In Steel Research International, 2022-02-01, 93, 2, pp. ISSN 16113683. Dostupné na: https://doi.org/10.1002/srin.202100389. NANDA, Aditi - IYER, Shankar - KATTADIYIL, Mathew T. - JAIN, Veena - KAUR, Harsimran - KOLI, Dheeraj. Contemporary Applications of 3D Printing in Prosthodontics. In 3D Printing in Oral Health Science: Applications and Future Directions, 2022-01-01, pp. 151-197. Dostupné na: https://doi.org/10.1007/978-3-031-07369-4_8. ROUDNICKÁ, Michaela - KUBÁSEK, Jiří - BIGAS, Jiří - VOJTĚCH, Dalibor. Stabilizing the Microstructure of Additively Manufactured Low-C Co-28Cr-6Mo Alloy. In Solid State Phenomena, 2022-01-01, 334, pp. 13-18. ISSN 10120394. Dostupné na: https://doi.org/10.4028/p-s43ksh. PRASHANTH, K. G. Processing of Al-based composite material by selective laser melting: A perspective. In Materials Today: Proceedings, 2022-01-01, 57, pp. 498-504. Dostupné na: https://doi.org/10.1016/j.matpr.2022.01.391. MA, Zhenghang - ZHAI, Qiang - WANG, Kunlun - CHEN, Guoxia - YIN, Xiaotian - ZHANG, Qingxia - MENG, Lingtao - WANG, Shenghai - WANG, Li. Fabrication of Fe-based metallic glass reinforced FeCoNiCrMn high-entropy alloy through additive manufacturing: mechanical property enhancement and corrosion resistance improvement. In Journal of Materials Research and Technology, 2022-01-01, 16, pp. 899-911. ISSN 22387854. Dostupné na: https://doi.org/10.1016/j.jmrt.2021.12.045. LEE, Wei Fang - WANG, Jia Chang - HSU, Ching Ying - PENG, Pei Wen. Microstructure, mechanical properties, and retentive forces of cobalt-chromium removable partial denture frameworks fabricated by selective laser melting followed by heat treatment. In Journal of Prosthetic Dentistry, 2022-01-01, 127, 1, pp. 115-121. ISSN 00223913. Dostupné na: https://doi.org/10.1016/j.prosdent.2020.06.038. ALEXANDRINO, L.D. - ANTUNES, L.H.M. - MUNHOZ, A.L.J. - RICOMINI, A.P. - DA SILVA, W.J. Mechanical and surface properties of Co-Cr alloy produced by additive manufacturing for removable partial denture frameworks. In JOURNAL OF PROSTHETIC DENTISTRY. ISSN 0022-3913, NOV 2023, vol. 130, no. 5, p. 780-785. Dostupné na: https://doi.org/10.1016/j.prosdent.2021.12.019. COBBINAH, P.V. - MATSUNAGA, S. - YAMABE-MITARAI, Y. Controlled Crystallographic Texture Orientation in Structural Materials Using the Laser Powder Bed Fusion Process-A Review. In ADVANCED ENGINEERING MATERIALS. ISSN 1438-1656, DEC 2023, vol. 25, no. 24. Dostupné na: https://doi.org/10.1002/adem.202300819. WANG, J.C. - ZHU, R. - LIU, Y.J. - ZHANG, L.C. Understanding melt pool characteristics in laser powder bed fusion: An overview of single- and multi-track melt pools for process optimization. In ADVANCED POWDER MATERIALS. OCT 2023, vol. 2, no. 4. Dostupné na: https://doi.org/10.1016/j.apmate.2023.100137. ANTOHE, M.E. - DASCALU, C.G. - FORNA, D.A. - HITRUC, E.G. - CIMPOESU, N. - FORNA, N.C. Research on the Quality of Partially Removable Skeletal Prostheses Made Using Classical Versus Modern Sintering Techniques. In BIOMEDICINES. SEP 2023, vol. 11, no. 9. Dostupné na: https://doi.org/10.3390/biomedicines11092397. GRABOWSKI, T. - ARA, I. - THORPE, J. - AZARMI, F. Investigation of Microstructural Characteristics of Cobalt Chromium Molybdenum Additively Manufactured Using Laser Directed Energy Deposition Technology. In METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE. ISSN 1073-5623, OCT 2023, vol. 54, no. 10, p. 4065-4079. Dostupné na: https://doi.org/10.1007/s11661-023-07154-1. STOIAN, C. - ARDELEAN, L.C. - NEGRUTIU, M.L. - MICLAU, M. - CASUT, C. - SINESCU, C. - ALEXANDRATOU, A. - KATSAVRIAS, A. - STOIAN, A.D. - ROMINU, M. Crystalline Structure Assessment of Ceramic Veneered Co-Cr-W Dental Alloy Substructures Obtained by Selective Laser Melting-A Pilot Study. In APPLIED SCIENCES-BASEL. JUL 2023, vol. 13, no. 14. Dostupné na: https://doi.org/10.3390/app13148052. ZHANG, L.S. - ZHANG, X.A. - LI, N. - ZHANG, P. - MEI, X.X. - WANG, Y.N. - UGLOV, V.V. Experimental and simulation studies on damage mechanisms of tungsten and molybdenum under compressed plasma flow irradiation. In NUCLEAR FUSION. ISSN 0029-5515, JUL 1 2023, vol. 63, no. 7. Dostupné na: https://doi.org/10.1088/1741-4326/acd016. CHEN, Z.Y. - LU, C.Q. - ZHUO, Y.H. - XIA, Z.X. - ZHU, X. - WANG, C.Y. - JIA, Q.B. Ductility enhancement of additively manufactured CoCrMo alloy via residual stress tailored high stacking fault probability. In SCRIPTA MATERIALIA. ISSN 1359-6462, OCT 2023, vol. 235. Dostupné na: https://doi.org/10.1016/j.scriptamat.2023.115626. ZHAO, Z.Y. - LIU, M.R. - DU, W.B. - BAI, P.K. - HU, Y.B. Tribological behavior of Gr/TC4 matrix composite through selective laser melting. In MATERIALS CHEMISTRY AND PHYSICS. ISSN 0254-0584, SEP 1 2023, vol. 305. Dostupné na: https://doi.org/10.1016/j.matchemphys.2023.127973. SAHA, S. - KIRAN, K.U.V. - ZHANG, X. - HOU, X.D. - ROY, S. Investigating the tribological and corrosion behavior of Co-Cr alloy as an implant material for orthodontic applications. In WEAR. ISSN 0043-1648, JUN 15 2023, vol. 523. Dostupné na: https://doi.org/10.1016/j.wear.2023.204755. HONG, Q. - BAI, P.K. - ZHAO, Z.Y. - WANG, J.H. First-Principle Study of the Interface of Alsub2/subOsub3/sub/CoCr Metal-Based Composites. In COATINGS. APR 2023, vol. 13, no. 4. Dostupné na: https://doi.org/10.3390/coatings13040680. NANDHAKUMAR, R. - VENKATESAN, K. A process parameters review on selective laser melting-based additive manufacturing of single and multi-material: Microstructure, physical properties, tribological, and surface roughness. In MATERIALS TODAY COMMUNICATIONS. JUN 2023, vol. 35. Dostupné na: https://doi.org/10.1016/j.mtcomm.2023.105538. ZHANG, Y. - LIN, W.H. - ZHAI, Z.R. - WU, Y.N. - YANG, R. - ZHANG, Z.B. Enhancing the mechanical property of laser powder bed fusion CoCrMo alloy by tailoring the microstructure and phase constituent. In MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. ISSN 0921-5093, JAN 18 2023, vol. 862. Dostupné na: https://doi.org/10.1016/j.msea.2022.144449. IM, H.T. - KIM, D.H. - SEO, B. - PARK, J.Y. - PARK, K.B. - LEE, D.H. - MO, C.B. - KIM, Y.D. - PARK, K. - PARK, H.K. Enhancement of the corrosion properties of selective laser melted Co-Cr-Mo alloy by selective oxidation annealing. In MATERIALS CHARACTERIZATION. ISSN 1044-5803, JAN 2023, vol. 195. Dostupné na: https://doi.org/10.1016/j.matchar.2022.112489. TONELLI, L. - AHMED, M.M.Z. - CESCHINI, L. A novel heat treatment of the additively manufactured Co28Cr6Mo biomedical alloy and its effects on hardness, microstructure and sliding wear behavior. In PROGRESS IN ADDITIVE MANUFACTURING. ISSN 2363-9512, APR 2023, vol. 8, no. 2, p. 313-329. Dostupné na: https://doi.org/10.1007/s40964-022-00334-2. ALINEJADIAN, N. - WANG, P. - KOLLO, L. - PRASHANTH, K.G. Selective Laser Melting of Commercially Pure Molybdenum by Laser Rescanning. In 3D PRINTING AND ADDITIVE MANUFACTURING. ISSN 2329-7662, AUG 1 2023, vol. 10, no. 4, p. 785-791. Dostupné na: https://doi.org/10.1089/3dp.2021.0265. DATTA, Sudipto - WAIDI, Yusuf Olatunji - PRASAD, Arbind. Metal 3D Printing for Emerging Healthcare Applications. In Advanced Materials and Manufacturing Techniques for Biomedical Applications, 2023-01-01, pp. 383-409. Dostupné na: https://doi.org/10.1002/9781394166985.ch15. FAN, J. M. - WANG, W. Y. - ZHU, Y. Y. - LIU, Q. - CHEN, S. Q. - GODFREY, A. - CHE, H. Q. - HUANG, X. X. TEM observations of variation of dislocation cell structures along the building direction in SLM-316L stainless steel. In Journal of Physics: Conference Series, 2023-01-01, 2635, 1, pp. ISSN 17426588. Dostupné na: https://doi.org/10.1088/1742-6596/2635/1/012037. MA, Ji. Additive Manufacturing of Aluminum Alloys. In Springer Handbooks, 2023-01-01, part F1592, pp. 713-724. ISSN 25228692. Dostupné na: https://doi.org/10.1007/978-3-031-20752-5_42. PENCHEV, P. Digitally designed casting ring and sprue system-a contemporary approach to the casting process in dentistry. In Archives of Materials Science and Engineering, 2023-01-01, 119, 1, pp. 31-41. ISSN 18972764. Dostupné na: https://doi.org/10.5604/01.3001.0016.3151. Kategória ADCA - Vedecké práce v zahraničných karentovaných časopisoch impaktovaných Kategória (od 2022) V3 - Vedecký výstup publikačnej činnosti z časopisu Typ výstupu článok Rok vykazovania 2016 Registrované v WOS Registrované v SCOPUS Registrované v CCC DOI 10.1016/j.dental.2015.09.003 článok
Názov súboru Prístup Veľkosť Stiahnuté Typ Licence Defects-tolerant Co-Cr-Mo dental alloys prepared by selective laser melting.pdf Neprístupný/archív 4 MB 6 Vydavateľská verzia rok CC IF IF Q (best) JCR Av Jour IF Perc SJR SJR Q (best) CiteScore A rok vydania rok metriky IF IF Q (best) SJR SJR Q (best) 2015 2014 3.769 Q1 2.250 Q1
Počet záznamov: 1