Počet záznamov: 1
The influence of additives on microstructure of sub-micron alumina ceramics prepared by two-stage sintering
Názov The influence of additives on microstructure of sub-micron alumina ceramics prepared by two-stage sintering Autor Galusek Dušan 1968 SAVANOCH - Ústav anorganickej chémie SAV ORCID Spoluautori Ghillányová Katarína SAVANOCH - Ústav anorganickej chémie SAV Sedláček Jaroslav 1975 SAVANOCH - Ústav anorganickej chémie SAV ORCID Kozánková Jana Šajgalík Pavol 1955 SAVANOCH - Ústav anorganickej chémie SAV RID ORCID Zdroj.dok. Journal of the European Ceramic Society. Vol. 32, no. 9 (2012), p. 1965-1970 Jazyk dok. eng - angličtina Krajina GB - Veľká Británia Druh dok. rozpis článkov z periodík (rbx) Ohlasy LIU, Jian - YAN, Haixue - REECE, Mike J. - JIANG, Kyle. Toughening of zirconia/alumina composites by the addition of graphene platelets. In JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. ISSN 0955-2219, 2012, vol. 32, no. 16, pp. 4185. POUCHLY, Vaclav - MACA, Karel - SHEN, Zhijian. Two-stage master sintering curve applied to two-step sintering of oxide ceramics. In JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. ISSN 0955-2219, 2013, vol. 33, no. 12, pp. 2275. MENG, Fancheng - ZHANG, Xiaolei - LIU, Cheng - REN, Haishen - HUANG, Weijiu. Study on the preparation of fine-grained CeO2-Al2O3 ceramics via two-step sintering method. In Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. ISSN 10003851, 2013-12-01, 30, sUPPL., pp. 73-77. MAGNANI, Giuseppe - SICO, Giuliano - BRENTARI, Alida - FABBRI, Paride. Solid-state pressureless sintering of silicon carbide below 2000 degrees C. In JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. ISSN 0955-2219, 2014, vol. 34, no. 15, pp. 4095. BEHERA, Shantanu K. - CANTWELL, Patrick R. - HARMER, Martin P. A grain boundary mobility discontinuity in reactive element Zr-doped Al2O3. In SCRIPTA MATERIALIA. ISSN 1359-6462, 2014, vol. 90-91, no., pp. 33. MAGNANI, Giuseppe - BRENTARI, Alida - BURRESI, Emiliano - RAITERI, Giancarlo. Pressureless sintered silicon carbide with enhanced mechanical properties obtained by the two-step sintering method. In CERAMICS INTERNATIONAL. ISSN 0272-8842, 2014, vol. 40, no. 1, pp. 1759. RITTIDECH, A. - SUEKWAMSUE, N. Influence of yttria additives on structural, microstructural and mechanical properties of alumina-zirconia composites prepared by two-stage sintering. In CERAMICS INTERNATIONAL. ISSN 0272-8842, 2015, vol. 41, no., pp. S123. GUEDES-SILVA, Cecilia C. - OTUBO, Larissa. Materials for sup99/supMo/sup99m/supTc generator columns. In Advances in Engineering Research, 2015-01-01, 10, pp. 143-152. POUCHLY, Vaclav - MACA, Karel. Sintering kinetic window for yttria-stabilized cubic zirconia. In JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. ISSN 0955-2219, 2016, vol. 36, no. 12, pp. 2931. ILIC, Svetlana - ZEC, Slavica - ROSIC, Milena - MAKSIMOVIC, Vesna - RUZIC, Jovana - URBANOVICH, Vladimir - MATOVIC, Branko. High pressure densification of nanocrystalline mullite powder. In CERAMICS INTERNATIONAL. ISSN 0272-8842, 2016, vol. 42, no. 4, pp. 5319. CHEN, Zhangwei - BRANDON, Nigel. Inkjet printing and nanoindentation of porous alumina multilayers. In CERAMICS INTERNATIONAL. ISSN 0272-8842, 2016, vol. 42, no. 7, pp. 8316. LOH, N. J. - SIMAO, L. - FALLER, C. A. - DE NONI, A. - MONTEDO, O. R. K. A review of two-step sintering for ceramics. In CERAMICS INTERNATIONAL. ISSN 0272-8842, 2016, vol. 42, no. 11, pp. 12556. BEHRAVESH, Erfan - HUPA, Leena - SALMI, Tapio - MURZIN, Dmitry Yu. Alumina ceramic foams as catalyst supports. In CATALYSIS, VOL 28. ISSN 0140-0568, 2016, vol. 28, no., pp. 28-50. NKAYEM, D. E. Njeumen - MBEY, J. A. - DIFFO, B. B. Kenne - NJOPWOUO, D. Preliminary study on the use of corn cob as pore forming agent in lightweight clay bricks: Physical and mechanical features. In JOURNAL OF BUILDING ENGINEERING. ISSN 2352-7102, 2016, vol. 5, no., pp. 254-259. HE, Xuanmeng - ZHU, Zhenfeng - LIU, Hui - FU, Lu. In-situ Cr-doped alumina nanorods powder prepared by hydrothermal method. In Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering. ISSN 1002185X, 2016-07-01, 45, 7, pp. 1659-1663. JOHARI, M. I.A. - MUSTAPHA, M. - MAMAT, O. - KAKOOEI, S. - GINTA, T. L. - ISMADI, M. Z.P. The microstructure, physical and mechanical properties of silicon carbide with alumina and yttria as sintering additives. In ARPN Journal of Engineering and Applied Sciences, 2016-01-01, 11, 22, pp. 13300-13304. HUAI XU-GUO - CHEN ZI-SHANG - LIANG XIAO-PING - BI SHENG. Effect of sintering additives size on the microstructure and wear properties of Al2O3 ceramics. In FERROELECTRICS. ISSN 0015-0193, 2017, vol. 521, no. 1, pp. 101-107. ZHANG, Ji-Yun - LUO, Zhao-Hua - JIANG, Hao-Chuan - JIANG, Jun - GUI, Zhen-Zhen - CHEN, Chun-Hua - LIU, Yong-Fu - LIU, Shuang - CI, Meng-Meng. Sintering of GGAG:Ce3+, xY(3+) transparent ceramics in oxygen atmosphere. In CERAMICS INTERNATIONAL. ISSN 0272-8842, 2017, vol. 43, no. 17, pp. 16036-16041. CAO, Wenbin - MAO, Xuan - YUAN, Yuan - LI, Lu - ZHAO, Libin - LI, Jiangong. Sintering kinetics of disperse ultrafine equiaxed alpha-Al2O3 nanoparticles. In JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. ISSN 0955-2219, 2017, vol. 37, no. 13, pp. 4005-4013. LOH, N. J. - SIMAO, L. - JIUSTI, J. - DE NONI, A. - MONTEDO, O. R. K. Effect of temperature and holding time on the densification of alumina obtained by two-step sintering. In CERAMICS INTERNATIONAL. ISSN 0272-8842, 2017, vol. 43, no. 11, pp. 8269-8275. DMITRIEVSKII, A. A. - TYURIN, A. I. - ZHIGACHEV, A. O. - GUSEVA, D. G. - OVCHINNIKOV, P. N. The Influence of Corundum Content and Sintering Temperature on the Mechanical Properties of CaO-ZrO2-Al2O3 Ceramic Composites. In TECHNICAL PHYSICS LETTERS. ISSN 1063-7850, 2018, vol. 44, no. 2, pp. 141-144. YAN, Shi Yu - YIN, Zeng Bin - XU, Wei Wei - YE, Jia Dong. Effect of Sintering Aids and Degumming Process on Properties of Microwave Sintered Al inf2/inf O inf3/inf Ceramic. In Rengong Jingti Xuebao/Journal of Synthetic Crystals. ISSN 1000985X, 2018-07-01, 47, 7, pp. 1318-1323. YUAN, Chang Suo - WANG, Zi Jing - ZHI, Qiang - ZHANG, Ya Ming - WANG, Xu Dong - YANG, Jian Feng. The preparation and properties of alumina ceramics through a two-step pressureless sintering process. In Materials Science Forum. ISSN 02555476, 2018-01-01, 922 MSF, pp. 47-54. SHAHRAKI, Mohammad Maleki - CHERMAHINI, Mehdi Delshad - ALIPOUR, Siamak - MAHMOUDI, Pezhman - SAFAEE, Iman - ABDOLLAHI, Mehdi. Ultra-high voltage SnO2 based varistors prepared at low temperature by two-step sintering. In JOURNAL OF ALLOYS AND COMPOUNDS. ISSN 0925-8388, 2019, vol. 805, no., pp. 794-801. LEE, Kuo-Yang - CHEN, Chih-Cheng - HSIANG, Hsing-I - YEN, Fu-Su - HUANG, Chi-Yuen. Fully sintered alumina with a higher Vickers hardness prepared using a gel-casting process. In INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY. ISSN 1546-542X, 2019, vol. 16, no. 4, pp. 1493-1500. PIETRZAK, Emilia - WIECLAW-MIDOR, Anna - WIECINSKA, Paulina - POTERALA, Marcin - SZAFRAN, Mikolaj. Thermal decomposition of polyhydroxy processing agents dedicated to colloidal shaping of ceramics Thermogravimetry coupled with mass spectrometry and properties of ZTA composites. In THERMOCHIMICA ACTA. ISSN 0040-6031, 2019, vol. 674, no., pp. 100-109. DHUBAN, S. B. - RAMESH, S. - TAN, C. Y. - WONG, Y. H. - ALENGARAM, U. Johnson - RAMESH, S. - TENG, W. D. - TARLOCHAN, F. - SUTHARSINI, U. Sintering behaviour and properties of manganese-doped alumina. In CERAMICS INTERNATIONAL. ISSN 0272-8842, 2019, vol. 45, no. 6, pp. 7049-7054. DMITRIEVSKII, A. A. - ZHIGACHEV, A. O. - ZHIGACHEVA, D. G. - RODAEV, V. V. The Influence of Silicon Dioxide on the Stability of the Phase Composition and Mechanical Properties of Alumina-Toughened Zirconia-Based Ceramics. In TECHNICAL PHYSICS. ISSN 1063-7842, 2020, vol. 65, no. 12, pp. 2016-2025. Dostupné na: https://doi.org/10.1134/S1063784220120075. WU, Jia-Min - LI, Meng - LIU, Shan-Shan - SHI, Yu-Sheng - LI, Chen-Hui - WANG, Wei. Preparation of porous Al2O3 ceramics with enhanced properties by SLS using Al2O3 poly-hollow microspheres (PHMs) coated with CaSiO3 sintering additive. In CERAMICS INTERNATIONAL. ISSN 0272-8842, 2020, vol. 46, no. 17, pp. 26888-26894. Dostupné na: https://doi.org/10.1016/j.ceramint.2020.07.165. ABYZOV, Andrey M. - KHRISTYUK, Nikolai A. - KOZLOV, Vladimir V. - SHAKHOV, Fedor M. Alumina ceramics doped with manganese titanate via applying Mn-Ti-O coatings to corundum micropowder. In JOURNAL OF THE KOREAN CERAMIC SOCIETY. ISSN 1229-7801, 2020, vol. 57, no. 6, pp. 692-707. Dostupné na: https://doi.org/10.1007/s43207-020-00076-3. LOH, N. J. - SIMAO, L. - JIUSTI, J. - ARCARO, S. - RAUPP-PEREIRA, F. - DE NONI, A. - MONTEDO, O. R. K. Densified alumina obtained by two-step sintering: Impact of the microstructure on mechanical properties. In CERAMICS INTERNATIONAL. ISSN 0272-8842, 2020, vol. 46, no. 8, pp. 12740-12743. Dostupné na: https://doi.org/10.1016/j.ceramint.2020.02.042. YANG, Zhigang - YIN, Ziqiang - WANG, Donghe - WANG, Hao - SONG, Huaqi - ZHAO, Zhijia - ZHANG, Guanglei - QING, Guoqiang - WU, Hongya - JIN, Huajiang. Effects of ternary sintering aids and sintering parameters on properties of alumina ceramics based on orthogonal test method. In MATERIALS CHEMISTRY AND PHYSICS. ISSN 0254-0584, 2020, vol. 241, no., pp. Dostupné na: https://doi.org/10.1016/j.matchemphys.2019.122453. TSCHIRPKE, Caroline - REICHEL, Uwe - BEGAND, Sabine - SIMON, Kerstin. Systematic investigation about the influence of two-step sintering on microstructure properties of ZTA ceramics. In ADVANCES IN APPLIED CERAMICS. ISSN 1743-6753, 2020, vol. 119, no. 1, pp. 37-40. Dostupné na: https://doi.org/10.1080/17436753.2019.1687209. STASTNY, Premysl - CHLUP, Zdenek - CASTKOVA, Klara - TRUNEC, Martin. High strength alumina tapes prepared by gel-tape casting method. In CERAMICS INTERNATIONAL. ISSN 0272-8842, 2021, vol. 47, no. 5, pp. 6988-6995. Dostupné na: https://doi.org/10.1016/j.ceramint.2020.11.048. DMITRIEVSKII, A. A. - ZHIGACHEVA, D. G. - ZHIGACHEV, A. O. - OVCHINNIKOV, P. N. Strength Properties of Zirconium Ceramics with Silica Additives Hardened with Alumina. In PHYSICS OF THE SOLID STATE. ISSN 1063-7834, 2021, vol. 63, no. 2, pp. 295-299. Dostupné na: https://doi.org/10.1134/S1063783421020050. WANG, Xiaoyang - LIU, Guihua - QI, Tiangui - HUANG, Wenqiang - LI, Xiaobin - ZHOU, Qiusheng - PENG, Zhihong. Quantitative relationship between the density and structural unit of alpha alumina prepared from gibbsite and boehmite. In CERAMICS INTERNATIONAL. ISSN 0272-8842, 2021, vol. 47, no. 10, pp. 14464-14474. Dostupné na: https://doi.org/10.1016/j.ceramint.2021.02.025. NIE, Guanglin - LI, Yehua - SHENG, Pengfei - ZUO, Fei - WU, Haolin - LIU, Leiren - DENG, Xin - BAO, Yiwang - WU, Shanghua. Microstructure refinement-homogenization and flexural strength improvement of Al2O3 ceramics fabricated by DLP-stereolithography integrated with chemical precipitation coating process. In JOURNAL OF ADVANCED CERAMICS. ISSN 2226-4108, 2021, vol. 10, no. 4, pp. 790-808. Dostupné na: https://doi.org/10.1007/s40145-021-0473-2. ZADOROZHNAYA, O. Yu. - KHABAS, T. A. - KAMYSHNAYA, K. S. - KUTUGIN, V. A. - MALYKHIN, S. E. Effects of sintering curves on microstructure, physical and mechanical properties and on low temperature degradation of zirconia-toughened alumina. In JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. ISSN 0955-2219, 2021, vol. 41, no. 16, pp. 274-281. Dostupné na: https://doi.org/10.1016/j.jeurceramsoc.2021.09.009. HU YAN-JUN - YIN ZI-QIANG - GONG YU-BO - YANG ZHI-GANG - YANG ZHAN-PING - LIANG YIN-CHUN - DONG DE-JUN - ZHAO JIN-JIN. Enhancing microstructural properties of alumina ceramics via binary sintering aids. In JOURNAL OF CENTRAL SOUTH UNIVERSITY. ISSN 2095-2899, 2021, vol. 28, no. 12, pp. 3705-3713. Dostupné na: https://doi.org/10.1007/s11771-021-4889-1. DMITRIEVSKIY, A. A. - ZHIGACHEVA, D. G. - GRIGORIEV, G. - OVCHINNIKOV, P. N. Change in the Microhardness of Composite Ceramics at the CaO-ZrO2/CaO-ZrO2 + Al2O3 Interface. In JOURNAL OF SURFACE INVESTIGATION. ISSN 1027-4510, 2021, vol. 15, no. SUPPL 1, pp. S137-S140. Dostupné na: https://doi.org/10.1134/S1027451022020264. ADAM, A.A. - ABU BAKAR, H. - AL AMANI, U. - PAIJAN, L.H. - AB WAHAB, N. - MAMAT, M.F. - ALI, M.B. - HERAWAN, S.G. - AHMAD, Z. Effect of Sintering Parameters on the Mechanical Properties and Wear Performance of Alumina Inserts. In LUBRICANTS. DEC 2022, vol. 10, no. 12. Dostupné na: https://doi.org/10.3390/lubricants10120325. VUKSIC, M. - ZMAK, I. - CURKOVIC, L. - KOCJAN, A. Effect of Two-Step Sintering on Properties of Alumina Ceramics Containing Waste Alumina Powder. In MATERIALS. NOV 2022, vol. 15, no. 21. Dostupné na: https://doi.org/10.3390/ma15217840. ZENG, Y. - CHEN, X.F. - SUN, L.J. - YAO, H.H. - CHEN, J.M. Effect of different sintering additives type on Vat photopolymerization 3D printing of Al2O3 ceramics. In JOURNAL OF MANUFACTURING PROCESSES. ISSN 1526-6125, NOV 2022, vol. 83, p. 414-426. Dostupné na: https://doi.org/10.1016/j.jmapro.2022.09.022. KERMANI, M. - POUCHLY, V. - LIN, Y. - HU, C.F. - GRASSO, S. Water-assisted cold isostatic pressing to enhance sinterability of alumina ceramics. In INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY. ISSN 1546-542X, MAY 2022, vol. 19, no. 3, p. 1249-1254. Dostupné na: https://doi.org/10.1111/ijac.13932. LIU, Leiren - NIE, Guanglin - HUANG, Danwu - ZHAO, Zhenhua - BAO, Yiwang - WU, Shanghua. Preparation of Alinf2/infOinf3/inf Ceramic Substrate with High Strength and Toughness by Doping Lainf2/infOinf3/inf-Yinf2/infOinf3/inf. In Journal of Ceramics, 2021-01-01, 42, 6, pp. 1026-1035. ISSN 2095784X. Dostupné na: https://doi.org/10.13957/j.cnki.tcxb.2021.06.016. DING, D.H. - GUAN, Y. - XIAO, G.Q. - MAO, Z.Y. - SHI, X.Q. - GAO, K.Q. - CHONG, X.C. - LUO, J.Y. - LEI, C.K. Effects of Sintering Temperature on Microstructure and Mechanical Properties of Pressureless Sintering Alumina Ceramics with Alsub2/subOsub3/sub-SiOsub2/sub-CaO Sintering Aids. In REFRACTORIES AND INDUSTRIAL CERAMICS. ISSN 1083-4877, JUL 2023, vol. 64, no. 2, p. 136-146. Dostupné na: https://doi.org/10.1007/s11148-023-00816-y. ALVES, P.C.F. - DA SILVA, D.G. - VASCONCELOS, D.C.L. - VASCONCELOS, W.L. - DO NASCIMENTO, J.F. - DE MELO, D.C. - PEREIRA, L.D. Influence of Sintering Parameters on the Structure of Alumina Tubular Membranes Obtained by Freeze-Casting. In JOURNAL OF CERAMIC SCIENCE AND TECHNOLOGY. ISSN 2190-9385, DEC 2023, vol. 14, no. 2, p. 89-98. Dostupné na: https://doi.org/10.4416/JCST2023-00009. BARUAH, B. - ANAND, R. - BEHERA, S.K. Sintering, microstructure, and mechanical properties of ZrOsub2/sub-doped Alsub2/subOsub3/sub. In ADVANCES IN APPLIED CERAMICS. ISSN 1743-6753, NOV 17 2023, vol. 122, no. 5-8, p. 311-321. Dostupné na: https://doi.org/10.1080/17436753.2023.2265191. LIN, K.J. - ZONG, X. - SHENG, P.F. - ZHAO, S.Z. - QI, Y.J. - ZHANG, W.D. - WU, S.H. Effects of SmF3 addition on aluminum nitride ceramics via pressureless sintering. In JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. ISSN 0955-2219, DEC 2023, vol. 43, no. 15, p. 6804-6814. Dostupné na: https://doi.org/10.1016/j.jeurceramsoc.2023.07.051. GE, Y.F. - GUO, Y.Q. - SHENG, N. - ZHU, C.Y. Fabrication of Cu-Ge macrocapsules using ceramic shells by powder formation method for high-temperature thermal energy storage. In SOLAR ENERGY MATERIALS AND SOLAR CELLS. ISSN 0927-0248, MAY 2023, vol. 253. Dostupné na: https://doi.org/10.1016/j.solmat.2023.112224. DMITRIEVSKIY, A.A. - ZHIGACHEVA, D.G. - GRIGORIEV, G.V. Ca-ATZ/Ca-ATZ+SiOsub2/sub functionally graded ceramic. In ADVANCES IN APPLIED CERAMICS. ISSN 1743-6753, JAN 2 2023, vol. 122, no. 1, p. 31-35. Dostupné na: https://doi.org/10.1080/17436753.2023.2192079. Kategória ADCA - Vedecké práce v zahraničných karentovaných časopisoch impaktovaných Kategória (od 2022) V3 - Vedecký výstup publikačnej činnosti z časopisu Typ výstupu článok Rok vykazovania 2012 Registrované v WOS Registrované v SCOPUS Registrované v CCC DOI 10.1016/j.jeurceramsoc.2011.11.038 
článok
rok CC IF IF Q (best) JCR Av Jour IF Perc SJR SJR Q (best) CiteScore A rok vydania rok metriky IF IF Q (best) SJR SJR Q (best) 2012 2011 2.353 Q1 1.343 Q1
Počet záznamov: 1