Počet záznamov: 1
The influence of milling and sanding on wood surface morphology
Názov The influence of milling and sanding on wood surface morphology Aut.údaje Jozef Kúdela, Leoš Mrenica, Ľubomír Javorek Autor Kúdela Jozef TUZDFNOD - Katedra náuky o dreve Spoluautori Mrenica Leoš TUZDFNOD - Katedra náuky o dreve Javorek Ľubomír TUZFTVTA - Katedra výrobnej a automatizačnej techniky Zdroj.dok. Acta Facultatis Xylologiae Zvolen : vedecký časopis Drevárskej fakulty. Vol. 60, no. 1 (2018), s. 71-83. - Zvolen : Technická univerzita vo Zvolene, 2018 Poznámky Lit. Jazyk dok. angličtina Krajina Slovenská republika Systematika 674.031.632.2 630*81 674.032.475.5 621.92 621.914 Heslá bukové drevo - beech wood * smrekové drevo - spruce wood * brúsenie - sanding * frézovanie - milling * morfológia povrchu dreva - wood surface morphology * drsnosť - roughness * vlnitosť povrchu - surface waviness Anotácia The influence of milling and sanding on surface morphology of beech and spruce wood is investigated in the paper . Wood morphology was assessed through roughness and waviness parameters. The experimental results showed that the two wood surface machining techniques studied differed in their impacts on the wood roughness and waviness . Lower roughness was obtained by m illing, with the milling parameters (rotation rate, specimen feed speed) not influencing the roughness significantly. The roughness of sanded surfaces was noticeably higher, with the prominent influence of the sanding grit size. In all cases, the roughness was significantly higher perpendicular to grain. T he roughness - related results showed that the differences between beech and spruce wood were noticeably reduced by the mechanical treatment . Despite this fact, the impact of wood species was confirmed. The porous character of wood is the cause of the higher roughness of the wood external surface. This implies that wood surface roughness can be smoothed by an appropriate mechanical treatment, but an absolutely smooth surface cannot be acquired. URL https://df.tuzvo.sk/sites/default/files/08-01-18_0.pdf Kategória publikačnej činnosti ADN Báza dát xcla - ČLÁNKY Druh dok. RBX - rozpis článkov z periodík Odkazy PERIODIKÁ-Súborný záznam periodika Zväzky 2018: 1-2 článok
Počet záznamov: 1