Počet záznamov: 1
Study of the influence of basic process parameters on the roughness of surfaces during milling of scots pine wood
Názov Study of the influence of basic process parameters on the roughness of surfaces during milling of scots pine wood Aut.údaje Valentin Atanasov, Georgi Kovatchev, Tihomir Todorov Autor Atanasov Valentin Spoluautori Kovatchev Georgi Todorov Tihomir Zdroj.dok. Acta Facultatis Xylologiae Zvolen : vedecký časopis Drevárskej fakulty. Vol. 65, no. 2 (2023), s. 89-98. - Zvolen : Technická univerzita vo Zvolene, 2023 Jazyk dok. angličtina Krajina Slovenská republika Systematika 630*81 630*174.7 582.475 621.914.3 Heslá drsnosť - roughness * spoje - joints * zrovnávacie frézky - planers * vreteno noža - knife spindle * masívne drevo - solid wood * borovica lesná - Scots pine - Pinus sylvestris Anotácia Experimental results in the processing of Scots pine (Pinus sylvestris L.). are presented in the paper. They were conducted under the manufacturing conditions. Three machines are used – two jointers with different knife spindle designs and with flat knives and replaceable rigid alloy plates – a helical cutter head, as well as a planer with flat knives. The measured parameter is Rz, and an electronic profilometer was used to measure its reading. The studies were conducted using the method of planned two-factor regression analysis. The selected factors are fundamental to the milling process – feed speed vf and radial depth of cut ae. Their levels of variation are determined on the basis of preliminary experiments, as well as the practical possibility of their realization. The results obtained with all three machines do not exceed 45 μm, and the ones for the planer make the strongest impression. URL https://df.tuzvo.sk/sites/default/files/08-02-23.pdf Kategória publikačnej činnosti ADN Báza dát xcla - ČLÁNKY Druh dok. RBX - rozpis článkov z periodík Odkazy PERIODIKÁ-Súborný záznam periodika Čísla 2023: 2 
článok
Počet záznamov: 1