Počet záznamov: 1
The effect of type of wood-based recyclate and low-quality timber in particleboard on mechanical properties of furniture joints
Názov The effect of type of wood-based recyclate and low-quality timber in particleboard on mechanical properties of furniture joints Aut.údaje Viktória Satinová ... [et al.] Preklad názvu podnázvu : Vplyv typu recyklátu na báze dreva a dreva nižšej kvality v drevotrieskových doskách na mechanické vlastnosti spojov nábytku Spoluautori Satinová Viktória TUZDFDT - Katedra drevárskych technológií Jánošíková Silvia TUZDFNDV - Katedra nábytku a drevárskych výrobkov Langová Nadežda TUZDFNDV - Katedra nábytku a drevárskych výrobkov Vidholdová Zuzana TUZDFDT - Katedra drevárskych technológií Iždinský Ján TUZDFDT - Katedra drevárskych technológií Zdroj.dok. Acta Facultatis Xylologiae Zvolen : vedecký časopis Drevárskej fakulty. Vol. 66, no. 1 (2024), s. 17-31. - Zvolen : Technická univerzita vo Zvolene, 2024 Poznámky Lit. Jazyk dok. angličtina Krajina Slovenská republika Systematika 630*862.2 684.4.058 Heslá drevené recykláty - wooden recyclates * drevotrieskové dosky - particleboards * nábytkové spoje - furniture joints * mechanické vlastnosti spojov - mechanical properties of joints Anotácia The effect of particleboard (PB) composition made of recycled or lower-quality timber on the mechanical properties of selected furniture joints is determined in the paper. The tested PBs were manufactured using recycled PB or blockboard from old furniture and lower- quality timber with brown or white rot. The laboratory-produced control PB with particle content of 100% sound spruce wood (Picea abies Karst. L.) and commercial PBs were used for comparison of the results. The load capacity and stiffness of corner joints with the confirmat (ø5 × 50 mm) and wooden dowel (ø6 × 30 mm) and the withdrawal resistance and stiffness of the screw (ø3.5 × 30 mm) were tested. The corner joints were loaded under compression by bending moment in the angular plane. In terms of load-carrying capacity, control PB was the most suitable in achieving a load-carrying capacity of 7827.61 N∙mm for the confirmat and PB from recycled blockboard 4072.71 N∙mm when using the wooden dowel. As for joint stiffness, the best values achieved were 1316.00 N∙mm/° and 808.58 N∙mm/° for the PB from recycled blockboard using the confirmat and dowel, respectively. PB from recycled blockboard again showed the highest values of screw withdrawal resistance - for the edge withdrawal 416.61 N and for the surface withdrawal 556.44 N. Considering the values found for the investigated mechanical properties, it was assumed that the tested materials can be used as non-load-bearing elements in furniture construction. URL https://df.tuzvo.sk/sites/default/files/02.pdf Kategória publikačnej činnosti ADN Báza dát xcla - ČLÁNKY Druh dok. RBX - rozpis článkov z periodík Odkazy PERIODIKÁ-Súborný záznam periodika Čísla 2024: 1 
článok
Počet záznamov: 1