Search results
Title Quantifying the finest particles in dust fractions created during the sanding of untreated and thermally modified beech wood Author info Jerzy Majka, Maciej Sydor ... [et al.] Author Majka Jerzy (10%)
Co-authors Sydor Maciej (10%)
Pędzik Marta (10%)
Antov Petar (10%)
Krišťák Ľuboš (10%)
Kminiak Richard (10%)
Kučerka Martin 1980- (30%) UMBFP07 - Katedra techniky a technológií
Rogoziński Tomasz (10%)
Source document BioResources. Vol. 17, no. 1 (2022), pp. 7-20. - Raleigh : North Carolina State University, 2022 Keywords sitová analýza brúsenie dreva bukové drevo Form. Descr. články - journal articles Language English Country United States of America URL Link na plný text Link na zdrojový dokument Public work category ADC No. of Archival Copy 51418 Catal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Database xpca - PUBLIKAČNÁ ČINNOSŤ References PERIODIKÁ-Súborný záznam periodika Title Indentation hardness and elastic recovery of some hardwood species Author info Maciej Sydor ... [et al.] Author Sydor Maciej (20%)
Co-authors Pinkowski Grzegorz (20%)
Kučerka Martin 1980- (20%) UMBFP07 - Katedra techniky a technológií
Kminiak Richard (20%)
Antov Petar (10%)
Rogoziński Tomasz (10%)
Source document Applied Sciences. Vol. 12, č. 10 (2022), pp. [1-14]. - Basel : Multidisciplinary Digital Publishing Institute, 2022 Keywords drevo - wood stromy - trees drevársky priemysel Form. Descr. články - journal articles Language English Country Switzerland Annotation The purpose of the study was to measure the Brinell hardness (HB) of six wood species and evaluate the ability to recover the depth of the imprint (self-re-deformation). Straight-grain clear samples of ash, beech, alder, birch, iroko, and linden wood were prepared. Measurements were made in the three main reference timber cross-sections: radial (R), tangential (T), and axial/longitudinal (L) and with two measuring loads of 30 kG and 100 kG (294.2 N and 980.7 N). The tested wood species could be classified into hard (ash, beech), medium-hard (alder, birch, iroko), and soft (linden) wood species. The HBs of each tested wood species differed in the cross-sections, i.e., side hardness (R, T) and end hardness (L). Higher HB values were obtained at 100 kG load in all species and all three cross-sections. The lowest influence of the measurement force value on the HB value was revealed for the soft wood species (linden: 107–118%). This influence was visible for the other five medium-hard and hard wood species, ranging from 125% to 176%. The percentage of temporary imprint in total imprint depth (x/H) varied from 12 to 33% (linden 12–18%—the lowest self-re-deformation ability; beech 25–33%—the highest self-re-deformation ability). The results of this study underline that the higher the density of the wood, the higher the Brinell hardness, and, simultaneously, the greater the measurement force used, the higher the Brinell hardness measured. The ability of self-re-deformation in wood’s R and T cross-sections depends on the wood density and the measuring force used. In contrast, this ability only depends on the wood density in the L cross-section. Those observations imply that the compaction of the cell structure during side compression is mainly non-destructive, while the longitudinal deformation of the cell structure (the buckling of cell walls and fracture of ends of the cells) is to a great degree destructive and irreversible. These results can be used in the construction and furniture sectors, especially when designing products and planning the woodworking of highly loaded wood floors and furniture elements. URL Link na plný text Public work category ADC No. of Archival Copy 51834 Repercussion category BAUFLEUR, Andressa Midori Yamauchi - STANGERLIN, Diego Martins - FERREIRA, Matheus Rafael - PARIZ, Elisangela - RODOLFO JUNIOR, Francisco - PAULA, Edgley Alves de Oliveira - DE MELO, Rafael Rodolfo. Effect of acetylation on technological characteristics of Jacaranda copaia wood : part 1 - physical and mechanical properties. In Nativa (Sinop). ISSN 2318-7670, 2022, vol. 10, no. 2, pp. 277-282.
ATANASOV, Valentin - KOVATCHEV, Georgi - TODOROV, Tihomir. Study of the influence of basic process parameters on the roughness of surfaces during wood milling. In 10th Hardwood conference proceedings, Sopron, 12th-14th October 2022 [online]. Sopron : University of Sopron press, 2022, pp. 242-250 [cit. 2022-10-20]. ISBN 978-963-334-446-0. Dostupné na: https://doi.org/10.35511/978-963-334-446-0
WARCHOLINSKI, Bogdan - GILEWICZ, Adam. Surface engineering of woodworking tools, a review. In Applied sciences (Basel). ISSN 2076-3417, 2022, vol. 12, no. 20, pp. 1-19.
MILLANIYAGE, Kuluni - KOTLAREWSKI, Nathan - WALLIS, Louise - TAOUM, Assaad - NOLAN, Gregory. Janka Hardness evaluation of plantation-grown eucalyptus nitens for engineered flooring applications. In Buildings. ISSN 2075-53,9, 2022, vol. 12, no. 11, pp. 1-14.
ATANASOV, Valentin - KOVATCHEV, Georgi - TODOROV, Tihomir. Influence of main parameters of the milling process on the roughness when processing solid wood of meranti. In Pro ligno. ISSN 1841-4737, 2023, vol. 19, no. 2, pp. 3-10.
ŽIGON, Jure - STRAŽE, Aleš. Vpliv vlažnosti na mikrotrdoto smrekovine, določeno z vtiskanjem. In Les [online]. 2023, vol. 72, no. 1, pp. 5-16 [cit. 2023-09-06]. ISSN 2590-9932. Dostupné na: https://doi.org/10.26614/les-wood.2023.v72n01a01
KOCZAN, Grzegorz. Probing measurements of the Meyer hardness index of radial, tangential and cross section of various types of wood. In Annals of Warsaw university of life sciences SGGW : forestry and wood technology. ISSN 1898-5912, 2023, no. 121, pp. 21-27.
ATANASOV, Valentin - KOVATCHEV, Georgi - TODOROV, Tihomir. Study of the influence of basic process parameters on the roughness of surfaces during milling of scots pine wood. In Acta facultatis xylologiae Zvolen. ISSN 1336-3824, 2023, vol. 65, no. 2, pp. 89-98.
MILLANIYAGE, Kuluni - KOTLAREWSKI, Nathan - WALLIS, Louise - TAOUM, Assaad. Engineered flooring from low-density plantation hardwood : evaluation of long-term in-service trials. In Wood and fiber science. ISSN 0735-6161, 2024, vol. 56, no. 1, pp. 24-42.
Catal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Database xpca - PUBLIKAČNÁ ČINNOSŤ References PERIODIKÁ-Súborný záznam periodika Názov Fine dust creation during hardwood machine sanding Aut.údaje Marta Pędzik, Tomasz Rogoziński ... [et al.] Autor Pędzik Marta (5%)
Spoluautori Rogoziński Tomasz (5%)
Majka Jerzy (5%)
Stuper-Szablewska Kinga (5%)
Antov Petar (5%)
Krišťák Ľuboš (25%)
Kminiak Richard (25%)
Kučerka Martin 1980- (25%) UMBFP07 - Katedra techniky a technológií
Zdroj.dok. Applied Sciences. Vol. 11, no. 14 (2021), pp. [1-11]. - Basel : Multidisciplinary Digital Publishing Institute, 2021 Kľúč.slová wood dust distribúcia - distribution sieve analysis laser diffraction Form.deskr. články - journal articles Jazyk dok. angličtina Krajina Švajčiarsko URL Link na plný text Link do databázy WoS Kategória publikačnej činnosti ADC Číslo archívnej kópie 50318 Kategória ohlasu VANDLIČKOVÁ, Miroslava - MARKOVÁ, Iveta - HOLLÁ, Katarína - GAŠPERCOVÁ, Stanislava. Evaluation of marblewood dust's (Marmaroxylon racemosum) effect on ignition risk. In Applied sciences (Basel). ISSN 2076-3417, 2021, vol. 11, no. 15, pp. 1-9.
VANDLÍČKOVÁ, Miroslava - MARKOVÁ, Iveta - GAŠPERCOVÁ, Stanislava - HOLLÁ, Katarína. Effect of particle size distribution of cumar dust on risk of initiation. In Waste forum. ISSN 1804-0195, 2021, no. 4, pp. 273-285.
MRACKOVA, Eva - SCHMIDTOVA, Jarmila - MARKOVA, Iveta - JADUDOVA, Jana - TUREKOVA, Ivana - HITKA, Milos. Fire parameters of spruce (Picea abies Karst. (L.)) dust layer from different wood technologies Slovak case study. In Applied scieneces (Basel). ISSN 2076-3417, 2022, vol. 12, no. 2, pp. 1-12.
CUI, Yunqi - YIN, Jian - CAI, Yitong - WANG, Huimin - DING, Tao - ZHU, Nanfeng. Morphological characteristics of bamboo panel milling dust derived from different average chip thicknesses. In Forests. ISSN 1999-4907, 2022, vol. 13, no. 9, pp. 1-18.
DADO, Miroslav - SALVA, Jozef - SCHWARZ, Marian - VANEK, Miroslav - BUSTIN, Lucia. Effect of grit size on airborne particle concentration and size distribution during oak wood sanding. In Applied sciences (Basel). ISSN 2076-34717, 2022, vol. 12, no. 15, pp. 1-14.
WARCHOLINSKI, Bogdan - GILEWICZ, Adam. Surface engineering of woodworking tools, a review. In Applied sciences (Basel). ISSN 2076-3417, 2022, vol. 12, no. 20, pp. 1-19.
SANTAMARIA-HERRERA, Alba - HOYUELOS, F. Javier - CASADO-MARCOS, Carlos. Characterization of the explosiveness of wood dust. In Process safety and environmental protection. ISSN 0957-5820, 2023, vol. 169, pp. 252-259.
PONPRATHOM, Yothin. Design and development of protective equipment from noise and dustof circular saws. In Advanced science journal. ISSN 1513-9980, 2022, vol. 22, no. 2, pp. R1-R20.
ULANOVA, T - ANTIPEVA, M - SUKHIKH, E - KRYLOV, A. Analysis of fine dust fractions in the atmospheric air near highways and intersections of a large industrial. In Bulletin of the Perm national research polytechnic university. Applied ecology, urban development. ISSN 2409-5125, 2022, no. 2, pp. 45-54.
DADO, Miroslav - SCHWARZ, Marian - SALVA, Jozef - JANKOVIC, Richard - HNILICA, Richard. Comparison of the declared and simulated real-use noise data during wood sanding using a hand-held power sander. In Acoustics. ISSN 2624-599X, 2023, vol. 5, no. 4, pp. 1136-1147.
RABIEI, F. - SOURI, Sh. Investigation of computer numerical control wood milling parameters for occupationally safer by the minimization of produced wood dust. In Wood material science and engineering. ISSN 1748-0272, 2024, vol. 19, no. 3, pp. 674-682.
Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xpca - PUBLIKAČNÁ ČINNOSŤ Odkazy PERIODIKÁ-Súborný záznam periodika Názov Granulometric characterization of wood dust emission from CNC machining of natural wood and medium density fiberboard Aut.údaje Richard Kminiak, Martin Kučerka ... [et al.] Autor Kminiak Richard (20%)
Spoluautori Kučerka Martin 1980- (27%) UMBFP07 - Katedra techniky a technológií
Krišťák Ľuboš (20%)
Réh Roman (20%)
Antov Petar (1%)
Očkajová Alena 1961- (10%) UMBFP07 - Katedra techniky a technológií
Rogozinski Tomasz (1%)
Pędzik Marta (1%)
Zdroj.dok. Forests. Vol. 12, no. 8 (2021), pp. 1-15. - Basel Basel : MDPI : Multidisciplinary Digital Publishing Institute, 2021 Kľúč.slová ochrana zdravia pri práci drevné kompozity drevný prach emisie granulometria prachu distribúcia produktu obrábanie dreva drevotrieskové dosky Heslá geogr. Slovensko Form.deskr. články - journal articles Jazyk dok. angličtina Krajina Švajčiarsko Anotácia The aim of this paper was to determine the particle size composition of wood dust emission from CNC milling of natural wood and medium-density fiberboard (MDF) and evaluate the associated occupational exposure risks. The paper is focused on some of the most commonly used materials in the woodworking and furniture industry, i.e., solid wood (beech, oak, and spruce) and composite materials (MDF panels). In addition to the influence of the machined material, the effect of the technical-technological parameters, namely, feed speed and depth of cut on the particle size distribution, was also investigated. The selected values of the technical-technological parameters used in this study followed the common work practice in small wood processing companies. The particle size distribution was evaluated by using sieve analysis of samples from the total mass of collected wood dust. The results demonstrated that machining of natural wood is characterized mostly by the formation of coarse dust fractions (2 mm–1 mm sieves), whilst the processing of MDF was associated with generation of fine dust fractions with a size below 100 m. The results obtained can be used for optimizing the technological programs of CNC milling machines, thus, reducing the occupational exposure to harmful wood dust emissions in the wood-processing industry. URL Link na plný text Kategória publikačnej činnosti ADC Číslo archívnej kópie 50464 Kategória ohlasu MRACKOVA, Eva - SCHMIDTOVA, Jarmila - MARKOVA, Iveta - JADUDOVA, Jana - TUREKOVA, Ivana - HITKA, Milos. Fire parameters of spruce (Picea abies Karst. (L.)) dust layer from different wood technologies Slovak case study. In Applied sciences (Basel). ISSN 2076-3417, 2022, vol. 12, no. 2, pp. 1-12.
MADANI, M. Znižennja zapilenosti povitrja robocoji zoni na derevoobrobnikh pidprijemstvach. In Tehnogenno-ekologìčna bezpeka. ISSN 2522-1892, 2022, vol. 11, no. 1, pp. 68-73.
CUI, Yunqi - YIN, Jian - CAI, Yitong - WANG, Huimin - DING, Tao - ZHU, Nanfeng. Morphological characteristics of bamboo panel milling dust derived from different average chip thicknesses. In Forests. ISSN 1999-4907, 2022, vol. 13, no. 9, pp. 1-18.
KOLEDA, Pavol - KOLEDA, Peter - HRČKOVÁ, Mária - JÚDA, Martin - HORTOBÁGYI, Áron. Experimental granulometric characterization of wood particles from CNC machining of chipboard. In Applied sciences. ISSN 2076-3417, 2023, vol. 13, no. 9, pp. 1-15.
LUBIS, Muhammad Adly Rahandi - PARK, Byung-Dae - KIM, Yeong-Suk - YUN, Jeonghee - SHIN, Hee Chang. Visual inspection of surface mold growth on medium-density fiberboard bonded with oxidized starch adhesives. In Wood material science and engineering. ISSN 1748-0272, 2023 vol. 18, no. 3, pp. 819-826.
MUHAMMED, Musa - JAVIDANI, Mousa - HEIDARI, Majid - JAHAZI, Mohammad. Enhancing the tribological performance of tool steels for wood-processing applications : a comprehensive review. In Metals. ISSN 2075-4701, 2023, vol. 13, no. 8, pp. 1-30.
WARGULA, Lukasz - WILCZYNSKI, Dominik - WIECZOREK, Bartosz - PALANDER, Teijo - GIERZ, Lukasz - NATI, Carla - SYDOR, Maciej. Characterizing sawdust fractional composition from oak parquet woodworking for briquette and pellet production. In Advances in science and technology. ISSN 2080-4075, 2023, vol. 17, no. 5, pp. 236-247.
WRONKA, Anita - KOWALUK, Grzegorz. Upcycling of wood dust from particleboard recycling as a filler in lignocellulosic layered composite technology. In Materials. ISSN 1996-1944, 2023, vol. 16, no. 23, pp. 1-13.
RABIEI, F. - SOURI, Sh. Investigation of computer numerical control wood milling parameters for occupationally safer by the minimization of produced wood dust. In Wood material science and engineering. ISSN 1748-0272, 2024, vol. 19, no. 3, pp. 674-682.
Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xpca - PUBLIKAČNÁ ČINNOSŤ Odkazy PERIODIKÁ-Súborný záznam periodika