Počet záznamov: 1
Thermowood and granularity of abrasive wood dust
Title Thermowood and granularity of abrasive wood dust Author info Martin Kučerka, Alena Očkajová Author Kučerka Martin 1980- (50%) UMBFP07 - Katedra techniky a technológií
Co-authors Očkajová Alena 1961- (50%) UMBFP07 - Katedra techniky a technológií
Source document Acta Facultatis Xylologiae Zvolen. Roč. 60, č. 2 (2018), s. 43-51. - Zvolen : Technická univerzita vo Zvolene, 2018 Keywords thermowood granularity wood dust Language Slovak Country Slovak Republic systematics 62 Annotation The granular composition of the abrasive dust of heat-treated wood from spruce and oak depending on the treatment at the temperature of 160 degrees C, 180 degrees C, 200 degrees C and 220 degrees C is presented in the paper. The proportion of dust fractions with a dimension of <= 0.08 mm was determined by a sieve analysis. The percentage of these proportions is similar for natural wood and wood treated at the temperature of 160 degrees C, 180 degrees C and 200 degrees C. Significantly lower proportion of dust fractions with dimensions of <= 0.08 mm occurred at a temperature of 220 degrees C in all examined samples. The fact that the main factor causing the drop of the dust fraction with a dimension of <= 0.08 mm at 220 degrees C is the reduction in wood density is assumed Public work category ADN No. of Archival Copy 43480 Repercussion category IGAZ, Rastislav - KMINIAK, Richard - KRIŠŤÁK, Ľuboš - NĚMEC, Miroslav - GERGEĽ, Tomáš. Methodology of temperature monitoring in the process of CNC machining of solid wood. In Sustainability. ISSN 2071-1050, 2018, vol. 11, no. 1, pp. 1-11.
ORŁOWSKI, Kazimierz A. - CHUCHAŁA, Daniel - MUZIŃSKI, Tomasz - BARAŃSKI, Jacek - BANSKI, Adrián - ROGOZIŃSKI, Tomasz. The effect of wood drying method on the granularity of sawdust obtained during the sawing process using the frame sawing machine. In Acta Facultatis Xylologiae Zvolen. ISSN 1336-3824, 2019, vol. 61, no. 1, pp. 83-92.
MACHOVÁ, Eliška - LANGOVÁ, Nadežda - REH, Roman - JOSCAK, Pavol - KRIŠTÁK, Ľuboš - HOLOUS, Zdeněk - IGAZ, Rastislav - HITKA, Miloš. Effect of moisture content on the load carrying capacity and stiffness of corner wood-based and plastic joints. In BioResources. ISSN 1930-2126, 2019, vol. 14, no. 4, pp. 8640-8655.
PALUBICKI, Bartosz - HLASKOVÁ, Ludka - ROGOZINSKI, Tomasz. Influence of exhaust system setup on working zone pollution by dust during sawing of particleboards. In International journal of environmental research and public health. ISSN 1660-4601, 2020, vol. 17, no. 10, pp. 1-9.
KUBOVSKÝ, Ivan - KRIŠŤÁK, L’uboš - SUJA, Juraj - GAJTANSKA, Milada - IGAZ, Rastislav - RUŽIAK, Ivan - RÉH, Roman. Optimization of parameters for the cutting of wood-based materials by a CO2 laser. In Applied sciences. ISSN 2076-3417, 2020, vol. 10, no. 22, pp. 1-16.
ROGOZINSKI, Tomasz - CHUCHALA, Daniel - PEDZIK, Marta - ORLOWSKI, Kazimierz A. - DZURENDA, Ladislav - MUZINSKI, Tomasz. Influence of drying mode and feed per tooth rate on the fine dust creation in pine and beech sawing on a mini sash gang saw. In European journal of wood and wood products. ISSN 0018-3768, 2021, vol. 79, no. 1, pp. 91-99.
BARANSKI, Jacek - DUDEK, Przemyslaw. Chip suction system in circular sawing machine : empirical research and computational fluid dynamics numerical simulations. In Acta Facultatis Xylologiae Zvolen. ISSN 1336-3824, 2021, vol. 63, no. 1, pp. 103-118.
ADAMCIK, Lukas - KMINIAK, Richard - BANSKI, Adrian. The effect of thermal modification of beech wood on the quality of milled surface. In Acta Facultatis Xylologiae Zvolen. ISSN 1336-3824, 2022, vol. 64, no. 2, pp. 57-67.
KOLEDA, Pavol - KOLEDA, Peter - HRČKOVÁ, Mária - JÚDA, Martin - HORTOBÁGYI, Áron. Experimental granulometric characterization of wood particles from CNC machining of chipboard. In Applied sciences. ISSN 2076-3417, 2023, vol. 13, no. 9, pp. 1-15.
BAATJIES, Roslynn - CHAMBA, Paulino - JEEBHAY, Mohamed F. Wood dust and asthma. In Current opinion in allergy and clinical immunology. ISSN 1528-4050, 2023, vol. 23, no. 2, pp. 76-84.
ČAVLOVIĆ, Anka Ozana - BEŠLIĆ, Ivan - PERVAN, Stjepan - PREKRAT, Silvana. Characteristics of thermally modified hardwood dust in determining workers’ occupational exposure. In BioResources. ISSN 1930-2126, 2023, vol. 18, no. 2, pp. 3923-3937.
DUDIAK, Michal - KMINIAK, Richard - BANSKI, Adrian - CHUCHALA, Daniel. The effect of steaming beech, birch and maple woods on qualitative indicators of the surface. In Coatings. ISSN 2079-6412, 2024, vol. 14, no. 1, pp. 1-11.
CHUCHALA, Daniel - ROGOZIŃSKI, Tomasz - ORLOWSKI, Kazimierz A. - PĘDZIK, Marta - HANINCOVÁ, Luďka - EGGERTSSON, Olafur. Granulometric characterization of Arctic driftwood sawdust from frame sawing process. In Industrial crops and products. ISSN 0926-6690, 2024, vol. 213, art. no. 118448, pp. 1-8.
Catal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Database xpca - PUBLIKAČNÁ ČINNOSŤ References PERIODIKÁ-Súborný záznam periodika 
nerozpoznaný
Počet záznamov: 1