Počet záznamov: 1  

The effect of the granulometric composition of beech chips from a CNC machining center on the environmental separation technique

  1. NázovThe effect of the granulometric composition of beech chips from a CNC machining center on the environmental separation technique
    Aut.údajeMartin Kučerka ... [et al.]
    Autor Kučerka Martin 1980- (30%) UMBFP07 - Katedra techniky a technológií
    Spoluautori Očkajová Alena 1961- (25%) UMBFP07 - Katedra techniky a technológií
    Kminiak Richard (25%)
    Pędzik Marta (10%)
    Rogozinski Tomasz (10%)
    Zdroj.dok. Acta Facultatis Xylologiae Zvolen. Roč. 64, č. 1 (2022), s. 89-97. - Zvolen : Technická univerzita vo Zvolene, 2022
    Kľúč.slová drevospracujúci priemysel   drevo - wood   ekológia - ecology  
    Form.deskr.články - journal articles
    Jazyk dok.slovenčina
    KrajinaSlovenská republika
    AnotáciaThe aim of the paper is to determine the granulometric composition of chip removed from the beech lumber milling process using a CNC machining center SCM Tech Z5 in the range of commonly used technical and technological parameters under standard conditions of feed speed: v(f) = 1 divided by 5 m.min(-1) and the thickness of the removed layer: e = 1, 3 and 5 mm. Another goal of the paper was to select a suitable separation technique that would be sufficient to effectively capture the largest possible dispersion of fractions in the beech lumber milling process. Granulometric analysis showed that under the given conditions in the milling process the largest proportion of coarse and medium coarse fraction is formed and particles with a size smaller than 32 mu m are not formed. For this reason, it is our recommendation to choose a combination of dry mechanical separators together with fabric filters, as mechanical separators are able to capture mainly larger particle fractions. Fabric filters would serve to trap any finer particles, thus saving the user from greater wear of the coarse and medium coarse fractions, which would increase the wear of the filter cloth to an increased extent.
    URL Link na plný text
    Kategória publikačnej činnosti ADN
    Číslo archívnej kópie51836
    Kategória ohlasu KOLEDA, Pavol - KOLEDA, Peter - HRČKOVÁ, Mária - JÚDA, Martin - HORTOBÁGYI, Áron. Experimental granulometric characterization of wood particles from CNC machining of chipboard. In Applied sciences. ISSN 2076-3417, 2023, vol. 13, no. 9, pp. 1-15.
    RABIEI, F. - SOURI, Sh. Investigation of computer numerical control wood milling parameters for occupationally safer by the minimization of produced wood dust. In Wood material science and engineering. ISSN 1748-0272, 2024, vol. 19, no. 3, pp. 674-682.
    Katal.org.BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici
    Báza dátxpca - PUBLIKAČNÁ ČINNOSŤ
    OdkazyPERIODIKÁ-Súborný záznam periodika
    článok

    článok

Počet záznamov: 1  

  Tieto stránky využívajú súbory cookies, ktoré uľahčujú ich prezeranie. Ďalšie informácie o tom ako používame cookies.