Počet záznamov: 1
Design and comparison of a suitable dust separation technique during the machining process in a CNC machining center
Názov Design and comparison of a suitable dust separation technique during the machining process in a CNC machining center Aut.údaje Martin Kučerka, Alena Očkajová ... [et al.] Autor Kučerka Martin 1980- (30%) UMBFP07 - Katedra techniky a technológií
Spoluautori Očkajová Alena 1961- (20%) UMBFP07 - Katedra techniky a technológií
Kminiak Richard (20%)
Rogoziński Tomasz (10%)
Sydor Maciej (5%)
Pędzik Marta (5%)
Giudice Valentina Lo (5%)
Todaro Luigi (5%)
Zdroj.dok. Annals of Warsaw University of Life Sciences - SGGW : forestry and wood technology. No. 122 (2023), pp. 99-107. - Varšava : Wydawnictwo SGGW, 2023 Kľúč.slová spracovanie dreva - wood processing obrábacie stroje Form.deskr. články - journal articles Jazyk dok. angličtina Krajina Poľsko Anotácia Design and comparison of a suitable separation technique during the machining process in a CNC machining center. The paper deals with the issue of chip extraction from the milling process in a CNC machining center. The paper aimed to compare the particle size distribution of dust generated in the milling process of natural wood (beech, oak, and spruce) and MDF on a 5-axis CNC machining center. The particle size distribution was evaluated using sieve analysis of samples from the total weight of the captured dust. The results showed that the processing of natural wood is mainly characterized by the formation of coarse dust fractions (2 mm - 1 mm sieves), while the processing of MDF was associated with the formation of fine dust fractions with a size below 100 μm. Another of the objectives was to compare the separation values on the fractional separation curves of selected mechanical separators and filters with the size distribution of dust particles and to propose a suitable separation technique that meets the criteria of "best available technique" (BAT) in the processing of natural wood and MDF, as well as to point out the creation of and the production of harmful dust fractions, which arise mainly during the processing of MDF. We intended to assess whether the introduction of the given technology with the given material mix will also require modifications on the side of the extraction device. URL Link na zdrojový dokument Link na zdrojový dokument Kategória publikačnej činnosti ADE Číslo archívnej kópie 53500 Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xpca - PUBLIKAČNÁ ČINNOSŤ Odkazy PERIODIKÁ-Súborný záznam periodika 
článok
Počet záznamov: 1